SERVOTOUGH Oxy Certification Supplement Manual - 30 Pages

Add to MyDirectIndustry favorites
SERVOTOUGH Oxy Certification Supplement Manual

Catalog excerpts

SERVOMEX PROCESS ANALYSERS Part Number: Revision: Language: SERVOMEX "m A MEASURABLE ADVANTAGE

 Open the catalog to page 1

This page intentionally blank

 Open the catalog to page 2

SERVOTOUGH Oxy Certification Supplement Manual CONTENTS 1. INTRODUCTION 2. EU DECLARATION OF CONFORMITY 3. ATEX CERTIFICATION 4. INTERNATIONAL (IECEx) APPROVALS 5. NORTH AMERICAN (CSA) APPROVALS

 Open the catalog to page 3

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 4

SERVOTOUGH Oxy Certification Supplement Manual 1. INTRODUCTION The SERVOTOUGH Oxy has been approved by various authorities for installation in hazardous areas. The certification offered with a specific analyser configuration will depend upon specification and country of delivery. See the certification labels attached to the analyser for exact approval details. The following information summarises the approvals that have been obtained. If the analyser is installed in a hazardous area then the electrical power, gland entries and NPT blanking plugs and connecting cables should be installed and...

 Open the catalog to page 5

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 6

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 7

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 8

This declaration of conformity is issued under the sole responsibility of the manufacturer. Equipment Type:    SERVOTOUGH Oxy (01910B1) Digital Analyser EC Type Examination Certificate & Notified Body: QA Notification & Notified Body: Harmonised Standards used: EN 60079-0:2012 EN 60079-1:2014 EN 60079-11:2012    . EN 60079-31:2014 Other Standards used & Specifications used: EN 61010-1 (2nd Edition)    Servomex Report Reference: 01910A02 8 Directive    Electromagnetic Compatibility (EMC) 2014/30/EU Standards & Specifications used: EN 61326-1:2013    Servomex Report Reference:    01910A027...

 Open the catalog to page 9

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 10

SERVOTOUGH Oxy Certification Supplement Manual 3. ATEX CERTIFICATION The analyser is ATEX certified to: ® II 2G Ex ia db IIC T4 Gb (-10°C <Ta <+60°C) or II 2D Ex tb IIICT90°C Db (-10°C<Ta <+60°C) or ® II 2GD Ex ia db IICT4Gb (-10°C <Ta <+60°C) Ex tb IIICT90°C Db (-10°C <Ta <+60°C) Certificate number: Baseefa 09ATEX0080X See certificate below:

 Open the catalog to page 11

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 12

Issued 21 December 2016 Page 1 of 5 1    EU - TYPE EXAMINATION CERTIFICATE 2    Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 2014/34/EU 3    EU - Type Examination Certificate Baseefa09ATEX0080X - Issue 6 Number: 3.1 In accordance with Article 41 of Directive 2014/34/EU. EC-Type Examination Certificates referring to 94/9/EC that were in existence prior to the date of application of 2014/34/EU (20 April 2016) may be referenced as if they were issued in accordance with Directive 2014/34/EU. Supplementary Certificates to such EC-Type Examination...

 Open the catalog to page 13

Issued 21 December 2016 Page 2 of 5 14    Certificate Number Baseefa09ATEX0080X - Issue 6 15 Description of Product The SERVOTOUGH digital analyser is designed for measuring gas concentrations using different transducers. Model “SERVOTOUGH Oxy” uses a paramagnetic transducer for measuring oxygen and model “SERVOTOUGH Spectra” uses an infra-red transducer for measuring other gases. The analyser is mains powered. The analyser comprises an enclosure with two compartments, one of which is Ex db and contains a user interface board, power supply board and barrier board. The second compartment...

 Open the catalog to page 14

Issued 21 December 2016 Page 3 of 5 Certificate Number Baseefa09ATEX0080X Issue 6 18 Essential Health and Safety Requirements In addition to the Essential Health and Safety Requirements (EHSRs) covered by the standards listed at item 9, the following are considered relevant to this product: Clause    Subject 1.2.7    LVD type requirements 1.2.8    Overloading of equipment (protection relays, etc.) 19 Drawings and Documents New drawings submitted for this issue of certificate: Sheet    Issue    Date    Description The above drawings are associated and held with IECEx Certificate No. IECEx...

 Open the catalog to page 15

Issued 21 December 2016 Page 4 of 5 Sheet    Issue    Date    Description 1 of 1    0    18/09/08    Approval, Barrier Board - Layer B 1 to 2    2    11/11/10    Approval, Barrier Board Circuit Diagram 1 of 1    0    18/09/08    Approval Drawing, Barrier Board - Layer D 1 of 1    0    18/09/08    Approval Drawing, Barrier Board - Layer A 1 of 1    3    10/02/10    Approval:    Distribution Board, Circuit Diagram 1 of 1    1    07/04/09    Approval Drawing Heater Board Assembly 1 of 1    1    07/04/09    Approval Drawing Heater Board - Layer C 1 of 1    1    07/04/09    Approval Drawing...

 Open the catalog to page 16

Issued 21 December 2016 Page 5 of 5 Certificate Number Baseefa09ATEX0080X Issue 6 20 Certificate History

 Open the catalog to page 17

SERVOTOUGH Oxy Certification Supplement Manual

 Open the catalog to page 18

SERVOTOUGH Oxy Certification Supplement Manual INTERNATIONAL (IECEx) APPROVALS The analyser is IECEx certified to: Ex ia db IIC T4 Gb (-10°C ≤Ta ≤+60°C) Ex tb IIIC T90°C Db (-10°C ≤Ta ≤+60°C) Certificate number: IECEx BAS09.0029X See certificate below:

 Open the catalog to page 19

All SERVOMEX catalogs and technical brochures

  1. 4900 Multigas

    4 Pages