SERVOTOUGH LaserSP 2930 Operator Manual - 97 Pages

Add to MyDirectIndustry favorites
SERVOTOUGH LaserSP 2930 Operator Manual

Catalog excerpts

SERVOTOUGH Laser SP (Model 2930) Part Number: Revision: Language: 02930001A 7 UK English SERVOMEX \ A MEASUREABLE ADVANTAGE

 Open the catalog to page 1

This page is intentionally left blank.

 Open the catalog to page 2

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 Read this manual and ensure that you fully understand its content before you attempt to install, use or maintain the Laser monitor. Important safety information is highlighted in this manual as WARNINGs and CAUTIONs, which are used as follows: WARNING Warnings highlight specific hazards which, if not taken into account, may result in personal injury or death. CAUTION Cautions highlight hazards which, if not taken into account, can result in damage to the Laser monitor or to other equipment or property. This manual also incorporates...

 Open the catalog to page 6

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 Please read entire manual carefully before using the SERVOTOUGH Laser Monitor. It is a sophisticated instrument utilising state-of-the-art electronic and laser technology. Installation and maintenance of the instrument require care and preparation and should only be attempted by competent personnel. Failure to do so may damage the instrument and void the warranty.  There are no user serviceable parts in the SERVOTOUGH Laser. WARNING The Laser monitor must not be used as personal protective equipment. WARNING The Safe area monitor is...

 Open the catalog to page 7

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 1.3 Measuring principle The SERVOTOUGH Laser Monitor is an optical instrument designed for continuous in-situ gas monitoring in stack, pipes, process chambers and similar applications and is based on tunable diode laser absorption spectroscopy (TDLAS). The SERVOTOUGH Laser Monitor utilises a transmitter/receiver configuration (mounted diametrically opposite each other) to measure the average gas concentration along the line-of-sight path.  SERVOTOUGH Laser Monitor is suitable for use in industrial environments or environments where...

 Open the catalog to page 8

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 NOTE: The SERVOTOUGH Laser Monitor measures the concentration of only the FREE molecules of the specific gas, thus not being sensitive to the molecules bound with some other molecules into complexes and to the molecules attached to or dissolved in particles and droplets. Care should be taken when comparing the measurements with the results from other measurement techniques. Instrument description The SERVOTOUGH Laser Monitor consists of 2 separate units: • Transmitter unit with power supply and purging • Receiver unit with purging...

 Open the catalog to page 9

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 The receiver electronics are connected with the transmitter electronics with a multicore cable. The detected absorption signal from the photo-detector is amplified and transferred to the transmitter unit through this cable. The same cable transfers the required power from the transmitter unit to the receiver unit. The transmitter enclosure contains the main CPU board, power supply, Aux pcb, optional Ethernet card and provides all customer connection terminals. The CPU board performs all instrument control and calculation of the gas...

 Open the catalog to page 10

SERVOMEXS SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 1.5    Software Software for the SERVOTOUGH Laser Monitor consists of 2 programs: 1. A program hidden to the user and integrated in the CPU electronics, running the micro controller on the CPU card. The program performs all necessary calculations and self-monitoring tasks. 2. A Windows based program running on a standard PC connected through the RS-232 connection. The program enables communication with the instrument during installation, service and calibration. The operator will need to use the PC based program only during...

 Open the catalog to page 11

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 1.7    Product data Model:    SERVOTOUGH LaserSP Receiver: 5 kg Environmental conditions: Operating temperature    -20oC to +55oC (-40F to +1310F) Note: +650C operation possible for selected applications. (Contact Servomex for availability) Storage temperature    -20oC to +55oC (-40F to +1310F) Apparatus is suitable for outdoor use Operating ambient pressure range:    101.3 kPa, -20%, +10% Maximum process pressures: Safe area version: 150 kPa absolute (1.5 bar absolute) Hazardous Area version: 110 kPa absolute (1.1 bar absolute) Note:...

 Open the catalog to page 12

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 2.1    Tools and other equipment The following equipment is necessary to install and calibrate the equipment: •    2    pcs open-end spanners for M16 bolts •    1    pcs Allen key 5 mm for the locking screws on flanges and Tx lid    screws •    1    pcs Allen key 3 mm for the RS232 cover screws •    1 pcs PC (386 or higher). Used during installation and calibration •    1    pcs flat screwdriver 2.5 mm for electrical connections •    1    pcs flat (6 mm) or cross head (No 2) screwdriver for Rx lid screws •    1    pcs 9/16” or 15mm...

 Open the catalog to page 13

SERVOTOUGH Laser SP Monitor, Operator Manual 02930001A_7 2.4 Flanges and stack hole requirements The monitor requires two holes diametrically opposite to each other, at least 50 mm in diameter. Standard flanges used for connection are DN50/PN10 with an inner diameter of 50 mm and an outer diameter of 165 mm. The flanges can either be welded directly to the process, or optionally be part of a valve connected to the process for safety purposes. The two alternatives are illustrated in Figure 2-2. WARNING You must mount the Laser monitor on a structure which is capable of supporting the mass of...

 Open the catalog to page 14

All SERVOMEX catalogs and technical brochures

  1. 4900 Multigas

    4 Pages