SERVOTOUGH Laser 3 Plus Certification Manual Part Number: Revision: Language:

This page inten�onally blank.

IMPORTANT INFORMATION Con�nued safe and reliable opera�on of this equipment is condi�onal on all installa�on, opera�on and maintenance procedures being carried out in accordance with the appropriate manuals, by personnel having appropriate qualifica�ons, experience and training. Failure to observe the requirements of the manual may result in the user being held responsible for the consequences and may invalidate any warranty. Servomex will accept no liability for unauthorised modifications to Servomex supplied equipment. Servomex has paid particular attention to Health and Safety throughout this...

This page inten�onally blank.

This page inten�onally blank

The SERVOTOUGH Laser 3 Plus has been approved by various authori�es for installa�on in hazardous and non- hazardous areas. The cer�fica�on offered depends upon the analyser specifica�on and country of delivery. See the cer�fica�on labels atached to the analyser for exact approval details. The following informa�on summarises the approvals that have been obtained. This cer�fica�on manual covers: 07931B1 SERVOTOUGH Laser Series Analyser The installer and/or the user of the analyser must be sa�sfied that the installa�on complies with any “Special Condi�ons for Safe Use” or “Schedule of Limita�ons” contained...

This page inten�onally blank © Servomex Group Limited. 2021

© Servomex Group Limited. 2021

This page inten�onally blank © Servomex Group Limited. 2021

© Servomex Group Limited. 2021

ATEX Certification The SERVOTOUGH Laser 3 Plus is available with the following markings for ATEX: Process Hazardous area zones no greater than Zone 2 or Zone 21 only II 3G Ex ic ec nC op is IIC T4 Gc (-20°C ≤ Ta ≤ +65°C) II 2D Ex tb [Ex op is] IIIB T135°C IP66 Db (-20°C ≤ Ta ≤ +65°C) Cer�ficate No.: Baseefa16ATEX0124X (Gas and Dust) Rated Supply Voltage 18 - 30Vdc Specific condi�ons of use: See cer�ficate

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

IECEx Certification The SERVOTOUGH Laser 3 Plus has been IECEx cer�fied and available with the following markings: Where the process being monitored is a hazardous area zone of no greater than Zone 2 or Zone 21 only Ex ic ec nC op is IIC T4 Gc (-20°C ≤ Ta ≤ +65°C) Ex tb [Ex op is] IIIB T135°C IP66 Db (-20°C ≤ Ta ≤ +65°C) Cer�ficate No.: IECEx BAS 16.0094X (Gas and Dust) Rated Supply Voltage 18 - 30Vdc Specific condi�ons of use: See cer�ficate

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

© Servomex Group Limited. 2021

North American Ordinary Location Certification The SERVOTOUGH Laser 3 Plus has been cer�fied for use in Ordinary loca�ons in USA and Canada: Rated Supply Voltage 18 - 30VDC, 25W Max Ambient temperature range -20°C to +65°C IP66 and type 4X © Servomex Group Limited. 2021

© Servomex Group Limited. 2021

North American Hazardous Location Certification The SERVOTOUGH Laser 3 Plus has been cer�fied for use in Hazardous loca�ons in USA and Canada: Rated Supply Voltage 18 - 30VDC, 25W Max Class I, Division 2, Groups A-D, Class II, Division 2, Groups F&G, Class III, Class I, Zone 2 Group IIC Ambient temperature range -20°C to +65°C, T4 IP66 and type 4X Condi�ons of acceptability: 1. The equipment must not be mounted in a high velocity dust laden atmosphere and must not be rubbed with a dry cloth. 2. The equipment is incapable of passing the dielectric strength test prescribed by the standards, and...

© Servomex Group Limited. 2021