*mydirectindustry

Catalogs
SERVOMEX
SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5

Product catalog summary

Introduction
The SERVOFLEX Micro i.s. 5100 series analyzers are certified for use in hazardous areas. The specific certification depends on the configuration and country of delivery. This manual covers the 5100 and 5100S series.

EU Declaration of Conformity
This section confirms the compliance of the SERVOFLEX Micro i.s. 5100 with EU regulations, ensuring it meets the necessary safety and performance standards.

ATEX European Hazardous Area Certification
The SERVOFLEX Micro i.s. 5100 is ATEX certified with markings II 1G Ex ia IIC T4 Ga, suitable for temperatures between -10°C and +50°C. Certificate numbers are Baseefa06ATEX0124 for the 5100 Series and Baseefa06ATEX0182X for the 5100S Series. The 5100S Series has specific conditions for use, including pressure and oxygen content requirements.

IECEx International Hazardous Area Certification
The device is IECEx certified as intrinsically safe with markings Ex ia IIC T4 Ga, suitable for temperatures between -10°C and +50°C. Certificate numbers are IECEx BAS06.0030 for the 5100 Series and IECEx BAS06.0042X for the 5100S Series.

North American Hazardous Location Certification
The SERVOFLEX Micro i.s. 5100 is approved by FM for use in hazardous locations in the USA and Canada. It is certified for Class I, Division 1, Groups A, B, C, D T4, and Class I, Zone 0, Ex ia IIC T4, with an IP65 rating. Certificate numbers are 3028268C for Canada and 3028268 for the USA.

Catalog excerpts

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-1

Certification Manual Part Number: Revision: Language:

Open the catalog to page 1

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-2

This page inten�onally blank

Open the catalog to page 2

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-3

IMPORTANT INFORMATION Con�nued safe and reliable opera�on of this equipment is condi�onal on all installa�on, opera�on and maintenance procedures being carried out in accordance with the appropriate manuals, by personnel having appropriate qualiﬁca�ons, experience and training. Failure to observe the requirements of the manual may result in the user being held responsible for the consequences and may invalidate any warranty. Servomex will accept no liability for unauthorised modiﬁcations to Servomex supplied equipment. Servomex has paid particular attention to Health and Safety throughout this...

Open the catalog to page 3

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-4

This page inten�onally blank

Open the catalog to page 4

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-6

This page inten�onally blank

Open the catalog to page 6

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-7

The 5100/5100S Series analysers have been approved by various authori�es for use in hazardous areas. The cer�ﬁca�on oﬀered with a speciﬁc analyser conﬁgura�on will depend upon speciﬁca�on and country of delivery. See the cer�ﬁca�on labels atached to the analyser for exact approval details. The following informa�on summarises the approvals that have been obtained. This cer�ﬁca�on manual covers: 1. 05110A1 ServoFlex Micro i.s. (cer�ﬁca�on iden�ﬁer: 5100 Series) 2. 05111A1 ServoFlex Micro i.s. (cer�ﬁca�on iden�ﬁer: 5100S Seri

Open the catalog to page 7

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-8

This page inten�onally blank © Servomex Group Limited. 2020

Open the catalog to page 8

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-9

Open the catalog to page 9

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-10

This page inten�onally blank © Servomex Group Limited. 2020

Open the catalog to page 10

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-11

Open the catalog to page 11

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-12

ATEX European Hazardous Area Certification The SERVOFLEX Micro i.s. 5100 is available with the following markings for ATEX: Cer�ﬁcate numbers: Baseefa06ATEX0124 (5100 Series) Baseefa06ATEX0182X (5100S Series) Speciﬁc Condi�ons of use (5100S Series Only): 1. This apparatus is designed for use in ambient atmospheric pressures in the range 0.8bar to 1.1bar and air with normal oxygen content i.e. typically 21% v/v. The 5100S Series Gas analyser may addi�onally have the gas ports connected to a pressurised gas source with normal oxygen content up to a maximum pressure of 1.8bar absolute (26psia)....

Open the catalog to page 12

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-13

Open the catalog to page 13

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-14

Open the catalog to page 14

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-15

Open the catalog to page 15

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-16

Open the catalog to page 16

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-17

Open the catalog to page 17

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-18

Open the catalog to page 18

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-19

Open the catalog to page 19

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-20

Open the catalog to page 20

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-21

Open the catalog to page 21

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-22

IECEx International Hazardous Area Certification The SERVOFLEX Micro i.s. 5100 has been IECEx cer�ﬁed as intrinsically safe and available with the following markings: Cer�ﬁcate numbers: IECEx BAS06.0030 (5100 Series) IECEx BAS06.0042X (5100S Series) © Servomex Group Limited. 2020

Open the catalog to page 22

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-23

Open the catalog to page 23

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-24

Open the catalog to page 24

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-25

Open the catalog to page 25

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-26

Open the catalog to page 26

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-27

Open the catalog to page 27

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-28

Open the catalog to page 28

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-29

Open the catalog to page 29

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-30

Open the catalog to page 30

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-31

North American Hazardous Location Certification The SERVOFLEX Micro i.s. 5100 has been approved by FM for use in Hazardous Loca�ons in USA and Canada: CANADA Class I, Division 1, Groups A, B, C, D T4 (-10°C ≤Ta ≤+50°C) IP65 Class I, Zone 0, Ex ia IIC T4 (-10°C ≤Ta ≤+50°C) IP65 USA Class I, Division 1, Groups A, B, C, D T4 (-10°C ≤Ta ≤+50°C) IP65 Class I, Zone 0, AEx ia IIC T4 (-10°C ≤Ta ≤+50°C) IP65 Cer�ﬁcate number: 3028268C (Canada) 3028268 (USA)

Open the catalog to page 31

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-32

Open the catalog to page 32

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-33

Open the catalog to page 33

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-34

Open the catalog to page 34

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-35

Open the catalog to page 35

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-36

Open the catalog to page 36

SERVOFLEX Micro i.s. 5100 Certification Manual 05100008A_5-37

Open the catalog to page 37

All SERVOMEX catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list