Super Scut
1Pages

MOUNTING RULES: • Put the 1008,0 end of the. cable in the hole of the item which should be sealed. • The loose end of the cable la moved through the hole In the case of the seal. • The cable is manually drawn tight In the seal, until the loop between the seal and device shrinks to 4-5 mm. • This requires rotating the colored Insert in the seal case clockwise not less than 3-4 times. After this, the projected part of colored insert (hasp) Is broken off and the seal Is considered to be mounted, * Is resistant to the change of climatic conditions, stands extreme temperature ♦ It can be easily mourned without a sealing machine. * The transparent case allows using different color variations of the inner parts of the seal. Numbers and customer s logo are protected from unauthorized modifica- tion with the help of plastic. ♦ There is a hole in the part which is broken off during the mounting (the hasp}, for sewing the hasp to the record card, therewith there is a possibility of putting the * Flexible galvanized cable with the diameter of 0,6 0.7 mm and breaking load of ♦ Marking Of a seven-digit number protects safely from the repeat in numeration. « Duplication of the seven-digit number on the case provides the additional security • The internal mechanism rotates only in one direction (clockwise), which makes the extraction of the cable after the mounting of seal impossible. * The name of manufacturing company Olimp and the year of manufacture are marked on the cases of seals. • The Super-Scut product cannot be opened without visible deterioration. * After the final assembly component parts are welded in monoblock unit with the help of modem equipment. * The extraction of rotating Insert, on which the cable is spooled, Is possible only by • The parts of seal can represent the combination of different colors. ■ Numbers, other inscriptions and drawings depicted on the seal are protected by the layer of plastic, which excludes any mechanical Impact on them. • The multitude of colors, monolith case, which safely protects the internal gear, large space for marking of information allow presenting of Super- Scut product as one of the safest and informational in this category of seals. • The following marking of inscriptions is possible in the standard execution: on one side of seal seven-digit number and two rows of letters, 5 characters In each row, On the opposite side the inscription can be made in 3 rows, 5, 7 and 5 letters in each correspondingly. Instead of inscription there Is a possibility of marking of emblem or trademark of customer company. The characters are up to 2.5 mm high and are of three colore (black, white and red), • There is the possibility of marking of 11-fetter inscription, with the height of font constituting 2 mm by special order. * Also the marking of number on the Super-Scut seals can be executed in 4 ways: t. Marking of number only on the front lining. 2. Marking of number on the front lining and on the case. 3, Marking of number on the front lining and on the breaking off part. 4. Marking of number on the front lining, on the case and on the breaking off part • Flexible galvanized cable with the diameter of up to 0.7 mm. * In standard execution the length of cable constitutes 250 mm. • By the special order the length can be extended. • Seals are packed in plastic bags, 100 items in each, then in cardboard boxes. 1000 seals in each. With the standard length of the cable, the weight of one box is