Oli Lock
1Pages

The OLILOCK seal is meant far sealing of measuring equipment, distribution cabi- nets, metering devices, premises and many ether items, (or provision of sealing safety of which the pulling of seal cable is needed. INSTALLATION INSTRUCTIONS: • Put the loose end of the cable in the hole of the item which should be sealed. • The loose end of the cable Is moved through the hole In the case of the seal. • Rotate the rotating insert clockwise not less than 3-4 times. It Is recommended to stop the rotating insert in horizontal position. • Without the breaking the projected part of rotating insert, push the blocking insert inside the case of the seal • After this, break the projected part of colored and the Installation is complete. * Resistant to the change of climatic conditions, stands extreme temperature • It can be easily mounted without a sealing machine. The transparent case allows using different color variations of the inner parts of the seal. Numbers and customer s logo are protected from unauthorized ■ modification with the layer of plastic. Flexible galvanized cable with the diameter of 0.6 0.7 mm and breaking • Marking of a seven-digit number protects safely from the repeat in numera- • Duplication of the seven-digit number on the case provides the additional security level. • The internal mechanism rotates only in one direction (clockwise), which makes the extraction of the cable after the mounting of seal impossible. ■ The name of manufacturing company Olimp and the year of manufacture • are marked on the cases of seals. The OliLock security seal cannot be opened without visible deterioration. * The extraction of rotating insert, on which the cable is spooled, is possible • only by its complete distraction. The parts of seal can represent the combination of different colors. • Numbers, other inscriptions and drawings depicted on the inner part of the seal are protected by the layer of plastic, which excludes any mechanical The multitude of colors, monolith case, which safely protects the internal gear, large space for marking of information allow presenting of OliLock seal as one of the safest and informational in this category of seals, ■ The following marking of inscriptions is possible in the standard execution: on one side of seal seven-digit number and two rows of letters, 5 characters in each row. On the opposite side is a possible of marking of emblem or trade- mark of Customer Company. * There is the possibility of marking of 11-ietler inscription, with the height of font constituting 2 mm by special order. * Also the marking of number on the Olilock seals can be executed in 4 ways: 1. Marking of number only on the insert. 2. Marking of number on the insert and on the case. 3. Marking of number on the insert and rotating insert 4. Marking of number on the insert, case and rotating insert. ■ Flexible galvanized cable with the diameter of up to 0.7 mm. In standard execution the length of cable constitutes 250 mm. By the special order the • Seals are packed in plastic bags. 100 items in each, then in cardboard boxes.