Inner Force
1Pages

INNER FORCE We bring to your notice the InnerForce seal a versatile device, which allows safe protection from the unauthorized access to cargo vehicles (vans, refrige- rator trucks, railway containers, tanks with oil products, groin carriers, ship- ping containers) warehouses, storage facilities, etc INNER FORCE<S> INHER FORCE MOUNTING RULES: » Take the cable, rnove i! to the left and put through the hole in the hasps that are being sealed. • Thread the cable into the hole situated in the center of the upper part of the seal; pull the cable down along the arrow hrough the hole. ■ Take the loose end of the cable which came out from the below of the seal, pull it up to the stop, minimizing to the utmost the loop around the hasps which are going to be sealed, • Next take the loose end of the cable and pull It up through the lower hole along the arrow, so that the loop from below completely enters the slot. • The mounting of the seal Is completed. ■ Belong to the class of high security seels. ■ Does not demand the use of sealing machine. • Flexible galvanized cable with the diameter of 2.25 mm stands the breaking load of not less than 3S00 N. ■ The name points to the design features metal-reinforced" case, covered with • Environmentally sound, • By sealing of tanks with fuels and lubricants with the help of InnerForce device, owing to the plastic layer which covers the case of the seal, the possi- bility of spark producing is eliminated. • The case of the seal is non-combustible, and is covered with polystyrene of • The impact-resistant polystyrene is non-toxic, non-expiosive; fiame tempera- ture is 343 C, temperature of spontaneous combustion 436 C. ■ Heating up to these temperatures is possible onfy in laboratory conditions. • Owing to plastic coating, the attempts to change or destroy the marking on the case of seal leave visible marks. • The use of double, independent from one another locking mechanism exclu- des the possibility of reverse motion of cable after the final mounting of the • During the production, the name of manufacturing company Olimp , name of the seal and arrows showing the direction of movement of the cable are ■ Special design (in appearance trie seal is similar to a locomotive) points to one of the main application fields railway vehicles. • Unlike the seals of Bolt type, compared regarding to the breaking load, it can be used when sealing the locks with offset hole. * Logos can be marked in different colors. - Opening without visible marks is excluded 100% guarantee. • There is the possibility of mounting of RFID chip. • Flexible galvanized cable with "the diameter of 2.25 mm. In standard execution the length of cable constitutes 400 mm. By the special order the length can be extended. Seals are packed in plastic bags, 20 items in each, then in cardboard boxes, 200 seals in each. With the length of the cable constituting 450 mm, the weight of one box with seals is 5.990 kg. • In standard execution it is possible to mark inscriptions on the front side of the seal in the form of a seven-digit number and two rows of letters. and also to mark a logo or a trademark of customer company on the . It is possible to double the number of the seal on the backside at