P ECO 4000 V TA
6Pages

Ozone Generator Installation and use instructions

Read this manual carefully before installing and/or connecting the generator Caution: Do not handle or open the generator while connected to the mains. Risk of download Do not use in environments where the temperature may exceed 50°C Protect from the elements and preserve it from humid and/or corrosive environments Safety Instructions Read this manual completely before installing your computer. Electrical connections must be made by qualified personnel and following current regulations. Make sure that the electrical installation of the equipment has a ground shunt and differential switch...

General description The portable Ozone Generator model P ECO 4000 V TA built in a robust stainless-steel case, is a direct discharge generator for environmental treatments or in ducts, both ventilation and air expulsion. The Generator incorporates a powerful fan that takes the air from the environment in which it is installed and, previously passing through the particulate filter installed in the rear, propelling it outwards through the ozone generating valve. The ozonated air is expelled into the environment through the standardized ventilation outlet, with a diameter of 100 mm, which is...

Aplication The ozone generator model P ECO 4000 V TA has, among others, the following applications: Shock treatments Completely close the room to be treated and, with the generator located outside, carry the air with ozone conducted by a tube (corrugated, galvanized, pvc ...) to the room to be treated. If the generator is placed in the same treatment room, the ozone will circulate inside the equipment, which being an oxidizing component, will reduce the useful life of the team. Once the application time has elapsed, be careful to wait between 20-30 minutes before entering the room so that...

Treatments in clean rooms and laboratories For this application, a high concentration of ozone in the environment is necessary to perform a shock treatment. Make sure there are no people or animals in the room during the treatment process. Once finished, let go for 20 to 30 min before entering Odor removal in air extraction systems In extractor hoods, ozone is injected into the exhaust chimney so that the ozone can perform its effect during the entire time that the air is expelled circulates through the chimney. In these cases, the longer the chimney, the greater the oxidation effect of the...