P 16000 T TA

P 16000 T TA

P 16000 T TA

Product catalog summary
Installation and Safety Instructions
Before installing the Ozone Generator, it is crucial to read the manual thoroughly. Electrical connections should be performed by qualified personnel, ensuring the installation includes a ground shunt and differential switch. The generator should not be tampered with while connected to the mains, and any defects in the power cord should be addressed immediately. The equipment must be installed in a clean, dry place, away from flammable products, and ozone treatment should not occur in the presence of people or animals. Maintenance should only be conducted by authorized personnel.

Technical Characteristics
The Ozone Generator operates on a 230V 50Hz power supply, consuming 0.9 A. It measures 480x250x280 mm, weighs 8 kg, and has a maximum ozone production of 16,000 mg/h. The equipment is housed in a stainless steel case and features a 460 m³/h output turbine.

General Description
The portable Ozone Generator model P 16000TTA is designed for environmental treatments, featuring a robust stainless steel case and a powerful turbine. It is suitable for applications requiring a mobile generator with high production capacity, effectively cleaning and deodorizing spaces through ozone's oxidation capacity.

Equipment Installation
The generator should be installed in a dry, ventilated area to prevent moisture and dirt from affecting performance. If used in a wet or dirty environment, it should be installed in a separate room with suitable conditions, using a conduit for ozone delivery. The conduit should not exceed 7-8 meters to ensure proper ozone flow. The generator should be connected to the mains and can be controlled with an external timer that manages the electrical supply.

Applications
The Ozone Generator model P 16.000 TTA is versatile, suitable for shock treatments, air conditioning ducts, cold rooms, clean rooms, laboratories, and odor removal in air extraction systems. For shock treatments, the room should be sealed, and ozone delivered via a tube. In air conditioning ducts, the generator should be installed near the duct, operating only when there is airflow. For cold rooms, ozone should be injected through a chamber hole, and for odor removal, ozone is injected into the exhaust chimney to maximize the oxidation effect.
See more

Catalog excerpts

P 16000 T TA-1

Ozono www.TopOzono.com Ozone Generator Installation and use instructions

 Open the catalog to page 1
P 16000 T TA-2

Read this manual carefully before installing and/or connecting the generator Caution: Do not tamper with or open the generator while is connected to the mains. Risk of download Do not use in environments where the temperature may exceed 50°C Protect from the elements and preserve it from humid and/or corrosive environments Safety Instructions Read this manual completely before installing your computer. Electrical connections must be made by qualified personnel and following current regulations. Make sure that the electrical installation of the equipment has a ground shunt and differential switch...

 Open the catalog to page 2
P 16000 T TA-3

General Description The portable Ozone Generator model P16000TTA built in a robust stainless steel case, is a direct discharge generator for environmental treatments or in ducts, both ventilation as air expulsion. The Generator incorporates a powerful turbine that takes the air from the environment in which it is installed and, previously passing through the particulate filter installed in the rear, propelling it outwards through the Ozone generating valve. The ozonated air is expelled into the environment through the standardized ventilation outlet, with a diameter of 100 mm, which is made of...

 Open the catalog to page 3
P 16000 T TA-4

Aplication The ozone generator model P16.000TTAhas, among others, the following applications: Shock treatments Completely close the room to be treated and, with the generator located outside, carry the air with ozone conducted by a tube (corrugated, galvanized, pvc ...) to the room to be treated. If the generator is placed in the same treatment room, the ozone will circulate inside the equipment, which being an oxidizing component, will reduce the useful life of the team. Once the application time has elapsed, be careful to wait between 20-30 minutes before entering the room so that residual...

 Open the catalog to page 4
P 16000 T TA-5

Treatments in clean rooms and laboratories For this application, a high concentration of ozone in the environment is necessary to perform a shock treatment. Make sure there are no people or animals in the room during the treatment process. Once finished, let go for 20 to 30 min before entering Odor removal in air extraction systems In extractor hoods, ozone is injected into the exhaust chimney so that the ozone can perform its effect during the entire time that the air is expelled circulates through the chimney. In these cases, the longer the chimney, the greater the the oxidation effect of the...

 Open the catalog to page 5

All SERVI OZONO catalogs and technical brochures

  1. GO 16000 AC

    5  Pages

  2. GO 8000 AC

    5  Pages

  3. GO 4000 AC XL

    5  Pages

  4. GO 24000 TA

    8  Pages

  5. GO 24000 T

    8  Pages

  6. GO 16000 TA

    5  Pages

  7. GO 16000 T

    5  Pages

  8. GO 12000 TA

    5  Pages

  9. GO 8000 TA

    5  Pages

  10. GO 8000 T

    5  Pages

  11. GO 4000 TA

    5  Pages

  12. GO 4000 T

    5  Pages

  13. P ECO 4000 V

    6  Pages

  14. GO 4000 AC CP

    8  Pages

  15. GO 2000 AC SC

    8  Pages

  16. GO 2000 AC

    7  Pages

  17. GO 500 AC TC

    5  Pages

  18. P 500 AC TA

    5  Pages

  19. P 1000 V TA

    6  Pages

  20. P 500 V TA

    6  Pages

  21. GO 2000 V TC

    6  Pages

  22. TOP-OZO-CAR

    1  Page

  23. TOP-OZO-HOME

    1  Page

  24. GO 1000 V TC

    6  Pages

  25. P 8000 T TA

    6  Pages

  26. P 500 AC TC

    5  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.