Ozone Generator Distributor:

The GO 50 V model is ready for wall installation. Please read this manual carefully before installing and/or connecting the generator It is preferable that the generator is located as high as possible since ozone is heavier than air. Precaution: Do not manipulate or open the generator while it is connected to the electrical network. Discharge risk Do not use in environments where the temperature may exceed 50°C For wall installation, the generator is ready to be hung on the wall with two (or four) fixing screws (or hooks) with their corresponding plugs thanks to four holes located on the sides...

This is the way to regulate the production, since the ozone generation is measured in mg/h, by regulating the operating time we manage to regulate the production. Example: If we adjust the timer to half, we will obtain half of the generator production in a unit of time (1h) Indicative Generator Active (producing O3) Turning the knob clockwise increases the operating time and reduces that of unemployment. Turning it in the opposite direction, the reverse effect is obtained Indicative of Generator operation The operation of the timer is cyclical. The start and stop cycle will be repeated indefinitely....

TECHNICAL CHARACTERISTICS Power supply Consumption Dimensions Weight Production Regulation Electrical production Box • • 230V 5OHz 0.2 A 170x200x65 mm 0.5 kg 500 mg/h.max Timer Fuse 1 A Stainless steel All the characteristics indicated above can be modified without previous notification. Do not open without first disconnecting it from the electrical network and do not manipulate it by unauthorized personnel. The voltage outlet must be equipped with a ground connection according to current regulations. If the power supply voltage exceeds 230 V ± 10% or there are excessive surges on the line, the...