Introduction
This document provides detailed instructions and specifications for the Ozone Generator model G0-8000-AC. It is crucial to read the manual before installation or connection to ensure safety and proper operation.

Precautions
- Do not open or manipulate the generator while connected to the electrical network to avoid electric shock.
- Avoid using the generator in environments exceeding 50ºC, or in wet or corrosive conditions.

Installation
The G0-8000 can be installed horizontally or vertically using the provided brackets. It is designed to deliver ozone through ducts using pressurized air from a compressor. The generator is housed in a stainless-steel case and features a digital cyclic timer for regulation.

Connection and Operation
- Connect the generator to a 230V power supply with grounding.
- Use a digital cyclic timer to regulate ozone production, with a cycle of 10 minutes.
- Ensure clean and dry air enters the ozone reactor for optimal performance.

Applications
The G0-8000 is suitable for various applications, including:
- Air conditioning ducts: Install near the duct and inject ozone after the turbine.
- Cold rooms: Install outside the chamber and inject ozone through a duct.
- Water tanks: Use porous bubblers or a recirculation system for ozone injection.
- Odor removal: Inject ozone into exhaust chimneys for odor control.

Technical Characteristics
- Power Supply: 230 V 50 Hz
- Consumption: 130W
- Dimensions: 645x405x248 mm
- Weight: 6 kg
- Production: 8000 mg/h max
- Regulation: Digital timer
- Protection: Fuse 2 A
- Material: Inox steel

Maintenance and Safety
- Do not open the generator without disconnecting it from the power supply.
- Ensure the generator is equipped with a ground shunt.
- Maintenance and repairs should be conducted by authorized personnel.
- Use a maximum of 0.5 bar pressure at the air inlet for models without a compressor.

Note
This equipment should not be installed inside cold rooms, and modifications to features may occur without prior notice.