GO 4000 AC XL

Product catalog summary

Introduction
The document provides detailed instructions and specifications for the Ozone Generator model G0-4000-AC XL, designed for applications requiring ozone delivery through ducts using pressurized air from a compressor.

Precautions
- Do not manipulate or open the generator while connected to the electrical network to avoid electric shock.
- Avoid using in environments exceeding 50ºC or in wet or corrosive conditions.

Installation
- The generator can be installed horizontally or vertically using brackets.
- Ensure the air entering the ozone reactor is clean and dry to prolong the generator's life.
- For models with an internal compressor, the outlet tube should be less than 5 meters.

Using the Generator
- Connect to a 230V grid with grounding.
- Use a digital cyclic timer to regulate production, with a 10-minute cycle.
- External timers can be used for specific timing needs.

Applications
- Air Conditioning Ducts: Install close to the duct, injecting ozonated air after the turbine.
- Cold Rooms: Install outside the chamber, using a duct to inject ozone.
- Water Tanks: Use porous bubblers or a recirculation system for ozone/water mixing.
- Odor Removal: Inject ozone into exhaust chimneys after the fan.

Technical Characteristics
- Power Supply: 230 V 50 Hz
- Consumption: 130W
- Dimensions: 645x405x248 mm
- Weight: 6 kg
- Production: 4000 mg/h max
- Regulation: Digital timer
- Protection: Fuse 2 A
- Material: Stainless steel

Maintenance and Safety
- Only authorized personnel should perform maintenance and cleaning.
- Ensure the generator is equipped with a ground shunt.
- Do not use if the power cord or connection is damaged.
- The generator should not be installed inside cold rooms.

Note
All features are subject to change without prior notice.

Catalog excerpts

Read this manual before installing or connecting the generator Precaution: Do not manipulate nor open the generator while is connected to the net electric. Risk of discharge The G0-4000 can be used both horizontally (on a flat surface) and vertically (wall mounting). For this, it has fixing brackets located at the back of the generator. For wall fixation, these brackets are used to fix it. For installation the screws are loosened of the Brackets turning them until the exterior position, Brackets y Returning a squeeze the Screws. Always do it in parts, first one squad and then the other. You can't...

Open the catalog to page 2

Connect the generator to the 230V grid using a plug equipped with grounding. Flip the start-up switch and the equipment will start working. The regulation of production is carried out by time, by means of a digital cyclic timer, with a cycle of 1O minutes, being able to regulate the operating time and the stoppage time within that cycle, which will be repeated indefinitely. Using the selector, we vary the number of minutes that the generator will remain active in that 10-minute cycle, leaving the rest of the time on hold until the start of a new cycle. APPLICATION This Generator of Ozone is adequate...

Open the catalog to page 3

Sterilization of clean rooms and laboratories These are just a few examples of possible applications of the Mod Ozone Generator. G0-8000 being very large its field of application, such as in water treatments in swimming pools, water treatment for washing fruits and vegetables, cutting rooms and food packaging, odor control in silos and pits, ... Note: This equipment should never be installed inside cold rooms. In water treatment applications in tanks, ALWAYS place the generator at a height higher than the maximum water level. Technical Characteristics Power Supply Digital timer Elect protection...

Open the catalog to page 4

GO 4000 AC XL

GO 4000 AC XL

Catalog excerpts

All SERVI OZONO catalogs and technical brochures