Ozone Generator Installation and use instructions

Read this manual before installing or connecting the generator Caution: Do not handle or open the generator while connected to the mains. Risk of download Do not use in environments where the temperature may exceed 50°C Protect from the elements and preserve it from humid and/or corrosive environments Safety Instructions Read this manual completely before installing your computer. Electrical connections must be made by qualified personnel and following current regulations. Make sure that the electrical installation of the equipment has a ground shunt and differential switch according to current...

General description The GO-24000 T model is a direct discharge Ozone Generator for environmental treatments or in ducts, both ventilation and air expulsion. The Generator incorporates an internal turbine that takes the air from the environment in which it is installed and, after passing through the air filters installed in the box, drives it outwards through the ozone generating valve . The ozonated air is expelled into the environment or duct through the standardized ventilation outlet, 100 mm in diameter built in galvanized steel. The Ozone Generator is used for disinfection and deodorization...

The fixing of the equipment on a surface will be carried out by means of the fastening brackets supplied with equipment. 4 fixing brackets are supplied that are bolted to the base of the box. Depending on the models, the equipment can be supplied with two metal frames (galvanized) fixed to the back of the box, so that the box can be fixed to the wall or structure that is required. Once the brackets are installed, the equipment is fixed to the wall using the screws and dowels appropriate to the surface where you want to install (not supplied) - brick, plasterboard, etc. Network cable Once the...

Fuctioning Connect the generator to the 230V grid using a plug equipped with grounding. Flip the start-up switch and the equipment will start working. The regulation of the production is carried out by time, by means of a digital cyclic timer, with a cycle of 10 minutes, being able to regulate the operating time and the time of unemployment within that cycle, which will be repeated indefinitely. Using the selector, we vary the number of minutes that the generator will remain active in that 10-minute cycle remaining the rest of the time on hold until the start of a new cycle. Independent of the...

Aplication The ozone generator model GO-24000 T has, among others, the following applications: Shock treatments Completely close the room to be treated and, with the generator located outside, carry the air with ozone conducted by a tube (corrugated, galvanized, pvc ...) to the room to be treated. Once the application time has elapsed, be careful to wait between 20-30 minutes before entering the room so that residual ozone is completely reduced, (Image equivalent model Air conditioning ducts Inflating the generator as close to the duct as possible, injecting the ozonated air into the distribution...

Cold rooms Installing the Io generator as close to the camera as possible (never inside) and injecting ozone through a hole in the chamber to pass the duct. For large cameras, a distribution tube can be installed inside to better replenish the ozone for all its volume. Odor elimination in air extraction systems In extra moral hoods, ozone is injected into the exhaust chimney so that the ozone can perform its effect during the entire time that the air is expelled circulates through the fireplace. In these cases, the longer the chimney, the greater the the oxidation effect of the substances that...