OZONE GENERATOR

Ozone Generator GO-12000 TA Turbine The GO-12000-TA can be used both horizontally (on a flat surface) and vertically (wall mounting).For this, the fixing brackets located at the front and back of the generator are used. The distribution of fixing holes has the following measures: 570 x 354 mm Read this manual carefully before installing and/or connecting the generator Caution: Do not handle or open the generator while connected to the mains. Risk of download Do not use in environments where the temperature may exceed 50°C Protect from the elements and preserve it from humid and/or corrosive environments...

This Ozone Generator is suitable for, among others, the following applications: Connect the generator to the 230V grid using a plug equipped with grounding. Flip the start-up switch and the equipment will start working. The regulation of the production is carried out by time, by means of a digital cyclic timer, with a cycle of 10 minutes, being able to regulate the operating time and the stoppage time within that cycle, which will be repeated indefinitely. Using the selector, we vary the number of minutes that the generator will remain active in that 10-minute cycle, leaving the rest of the time...

CHARACTERISTICS TECHNIQUES Odor removal in air extraction systems In extractor hoods, ozone is injected into the exhaust chimney so that the ozone dog performs its effect during the entire time that the expelled air circulates through the chimney. In these cases, the longer the chimney, the greater the oxidation effect of the substances that generate bad odors. Power supply Consumption Dimensions Production Elec protection Output All the features listed above may be modified without prior notice. Do not open without first disconnecting it from the electrical network and not handling it by unauthorized...