GO 1000 V TC
6Pages

Ozone www.TopOzono.com Ozone generator Use and installation instructions

Please read this manual carefully before installing and/or connecting the generator Precaution: Do not manipulate or open the generator while it is connected to the electrica Do not use in environments where the temperature may exceed 50°C Protect it from the outdoors and preserve it from damp and/or corrosive environments Security instructions Read this manual completely before installing the equipment. The electrical connections must be carried out by qualified personnel and in accordance with current regulations. Make sure that the electrical installation of the equipment and accessories...

General description The 1000 V model is an Ozone Generator for deodorization applications and environmental treatments in which the ozone is released directly onto the environment to be treated, by means of an internal fan that forces the air to pass through the ozone generating valves, expelling it to the outside. This ozone generator is mounted in a stainless-steel box, including ozone-producing valves, a fan to expel ozone into the environment, and a particle filter at the rear (to clean the intake air). The regulation system of the equipment is carried out by means of a digital timer...

Fixing the equipment on a surface can be done in two ways: 1. Through the fixing holes on the base plate (lower) of the equipment, which can be used to place it on fixed spikes on the wall or with screws/fixing plugs. For the latter, I was able to remove the fixing screws from the cover and remove it completely, in order to fix the equipment to the wall from the inside (this last operation should only be carried out by personnel authorized by the manufacturer and always following the safety regulations). Fixing brackets 2. Using the fixing brackets (4 units) provided with the equipment....

The timer regulates the production of the equipment through the operating time. Using the rotary knob we select a position (from 0 to 9). With an operating cycle of 10 minutes, the activation time is regulated as indicated in the following table. Timetable The equipment will generate air with ozone and expel it through the output connector while the ON time lasts. Once this has elapsed, the generator will remain stopped (OFF time) until the programmed time has elapsed, at which time the timer will start up again, repeating the cycle indefinitely according to the times indicated in the table...