*mydirectindustry

Catalogs
SERTO
Tubes, Hoses

Tubes, Hoses

Product catalog summary

Overview
This document provides a detailed overview of various types of tubes and hoses, focusing on their materials, characteristics, and applications. It covers specifications for tubes made from materials such as PA-Polyamide, PE-Polyethylene, PU-Polyurethane, PTFE, PVDF, FEP, and stainless steel.

Specifications and Characteristics

PA-Polyamide: Flexible, low moisture absorption, high impact resistance, suitable for high mechanical stress, resistant to oils and diluted acids. Not suitable for concentrated acids or hot water. Temperature range: -60°C to +100°C, briefly up to +130°C without pressure.
PE-Polyethylene: Suitable for flexible pneumatic lines, good chemical resistance, not suitable for oxidizing acids, oils, or hydrocarbons. Temperature range: -60°C to +80°C, briefly from -95°C to +100°C.
PU-Polyurethane: Elastic, excellent mechanical properties, chemical resistance, very flexible, kink-resistant. Temperature range: -40°C to 80°C.
PTFE: Universal chemical resistance, physiologically harmless, excellent anti-adhesive properties, flexible, transparent. Temperature range: -200°C to +180°C.

Installation and Usage Recommendations

Protect plastic tubing from direct sunlight and high temperatures. Black tubing is recommended for better resistance.
Use proper cutting tools to avoid crushing tube ends.
Consider thermal expansion and contraction during installation.

Technical Data
The document includes tables detailing nominal pressure, minimum bend radius, and available colors for each type of tube, along with their form of supply. It specifies material hardness and safety factors relative to bursting pressure.

Additional Specifications

PTFE Tubes: Temperature resistant from -200°C to +180°C, excellent anti-stick properties, very tight tolerances, smooth surfaces, excellent chemical resistance.
PVDF Tubes: High strength, rigidity, toughness, temperature range: -20°C to +120°C, outstanding aging and weather resistance.
FEP Tubes: High transparency, suitable for visual inspection, FDA approved for food contact, temperature resistant from -200°C to +200°C.
Stainless Steel Tubes: Seamless, cold drawn, heat-treated, dimensions according to DIN 2462 D4 T4.

Procedures and Recommendations

Use PTFE and FEP tubes considering their specific temperature and chemical resistance properties.
PVDF tubes are suitable for high mechanical strength and chemical resistance applications.
Stainless steel tubes are ideal for precision applications.

Key Data from Tables

PTFE tubes have varying nominal pressures and minimum bend radii.
PVDF tubes focus on chemical resistance.
FEP tubes are noted for transparency and suitability for food industry applications.
Stainless steel tubes focus on precision and compatibility with specific fittings.

SERTOflex Tubing

Composition: 3-layer tube with aluminum core, ethylene copolymer film, and HD-PE coating.
Temperature Range: -25°C to +65°C.
Applications: Pneumatic applications.
Characteristics: Lightweight, easily bendable, retains shape, compatible with SERTO unions.

jacoflon PTFE Hoses

Material: PTFE with stainless steel jacket.
Temperature Range: -60°C to +250°C.
Applications: Suitable for various industrial applications including steam press machines and aerospace engineering.
Characteristics: Flexibility, corrosion and pressure resistance, high chemical resistance, thermal stability, non-toxicity.

Technical Data and Ordering Information
Detailed specifications for jacoflon hoses, including dimensions, pressure ratings, and materials. Ordering examples provided for clarity.

Catalog excerpts

Rohre, SchlucheTubes, TuyauxTubes, Hoses 9 >

Open the catalog to page 1

Seite/Page/Page Seite/Page/Page Seite/Page/Page 9.2 9.4 9.7 >

Open the catalog to page 2

Eigenschaften,Besonderheiten Gn䩩ralits Characteristics, specialities - speziell auf SERTO-Verbindungen abgestimmt- reichhaltiges Zubehr- Rohre und Schl鶤uche fr spezielleAnwendungen- verschiedene Materialien - spcialement adapt쩩s aux raccords SERTO- un choix riche en accessoires- tubes et tuyaux pour des applications spciales- en matriaux diff驩rents - fits the special requirements of the SERTO unions- wide range of accessories- tubes and hoses for special applications- different materials available > Kunststoffrohre Tubes en matire plastique Plastic tubing Speziell fr Niederdruck- undNiedertemperaturbereich...

Open the catalog to page 3

PerfluorethylenpropylenFEP 140FEP wird konventionell thermoplastisch ver-arbeitet. PTFE und FEP sind hnlich in Ihrenguten dielektrischen Eigenschaften, derchemischen Best䤤ndigkeit, Einsatzfhigkeitim unteren Temperaturbereich, dem Rei-bungskoeffizienten, der Anti-Haft-Eigen-schaft und der Widerstandsfhigkeit gegenWitterung und Alterung. Der Hauptunter-schied zwischen PTFE und FEP liegt imoberen Temperatureinsatzbereich. FEP isttransparenter als PTFE und elastischer beigeringen Temperaturen als PTFE. Wie alleFluorkunststoffe kann FEP dampf- oderchemisch sterilisiert werden. FEP ist durchdie hohe...

Open the catalog to page 8

QualittNahtlos, kalt nachgezogen, zunderfreiwrmebehandelt, metallisch blank mit sauberer, glatter Oberfl䤤che.Werkstoff1.4571( QualitTubes sans soudure, retir驩s froid, recuitblanc, dcap੩s, finition propre et lisse.Matire1.4571( QualitySeamless, cold drawn, descaled, heattreated bright metal finish with clean,smooth surface.Material1.4571( 316 Ti)Abmessungen und ToleranzenDIN 2462 D4 T4D4 Aussen-. 踱0,1 mmT4 Wandstrke 0,15 mmAusf䱼hrung DIN 17458 n2 316 Ti)Dimensions et TolrancesDIN 2462 D4 T4D4 . ext鸩rieur 0,1 mmT4 ѩpaisseur de paroi 0,15 mmExѩcution DIN 17458 n2 316 Ti)Dimensions and TolerancesDIN...

Open the catalog to page 9

1234 > 1 Innere PE-Beschichtung 2 Aluminium Einlage3 Film aus PE4 Decke aus HD-PE1 Rev䤪tement intrieur en PE2 Ame daluminium3 Pellicule en PE4 Rev钪tement extrieur PE-HD1 Internal PE coating 2 Aluminium layer3 Film made from PE4 HD-PE jacket Bestell Nr.鸸Toleranzen-Passende SttzhlseBetriebsdruckMinimaler GewichtRollenl켤ngeNo de commandeausseninnenAussen-Douille dappui Pression BiegeradiusPoidsLongueur Order No.ext蒩rieurintrieurTolrancesappropri驩ede serviceRayon minimalWeightde la bobineoutsideinternal -extrieurSuitable stiffener Operating de courbureStandard TolerancesleevepressureMinimum lengthsoutside-詸25C...

Open the catalog to page 10

Bestellbeispiel:jacoflon-Schlauch mit Doppelgeflecht,StandardqualitФt > 3 ⁄ > 8 in einer LӤnge von800 mm, einseitig Pressarmatur ber-wurfmutter DIN 7608 ܖ 60 R > 3 ТD > 8 Ғ. One side with unionnut R > 3 ⁄ > 8 Ғ, crou R > 3 颁 > 8 Ē DIN 7608 avec cҴne 60dВun ct,embout lisse de 12 mm 䩸 extrieur enacier zingu de l驒autre ct.Ordering example:PTFE hose with double wire jacket standardquality, hose dim. > 3 䩢D > 8 Ғ with conical nipple 60. Other sidewith cylindrical stub 12 mm. Material of thecomponents: galvanized steel. > 3 ТD > 8 ђ Stahl,verzinkt, an der Seite PressarmaturRohrstutzen 12 mm AussendurchmesserStahl...

Open the catalog to page 12

Type䤸 DN DNAussen-Berstdruck BetriebsdruckBiegeradiusGewichtKonusAussen-Rohr-踸 extrieurPression Pression RayonPoidsCnegewindestutzenoutside 鴸dҩclatementde service de courbureWeight ConeFiletageEmboutBursting OperatingBend radiusmle lisseZollpressure pressure MaleCyl. Stubpoucebei//at 20⠰Cbei//at 20Cthreadinchmmmmbarbarmmg/m60రAd Automobilqualitt AQ mit dickwandigem PTFE-Rohr und einfachem DrahtgeflechtQualit standard AQ avec tube en PTFE 䩠 paroi paisse et tresse en fil simpleAutomobile quality with tick walled PTFE tube and single wire jacketJF PTFE 1 AQ > 1 颁 > 8 3,56,59003002570 > 1 ĢD > 8...

Open the catalog to page 13

Tubes, Hoses

Tubes, Hoses

Catalog excerpts

All SERTO catalogs and technical brochures

Archived catalogs