Series High Tech Drilling-Milling machine Threaded quill nose for tool fitting MT 4 Standard: Automatic mechanical quill-feed TR: 800 x 360 mm Rectangular table with rack

Series High Tech Drilling-Milling machine high performance transmission with electronic potentiometer Standard: Digit Panel TR: 800 x 360 mm Rectangular table with rack Threaded quill nose for tool fitting MT 4

Series High Drilling-Milling machine with 3 visualized axes and programmable manual machining cycle Threaded quill nose for tool fitting MT 4 Standard: Automatic electromagnetic quill-feed Standard: Integrated visualizer for cycles

Series High Drilling-Milling machine with 3 visualized axes and programmable manual machining cycle with electronic potentiometer Standard: Automatic electromagnetic quill-feed Standard: Integrated visualizer for cycles Threaded quill nose for tool fitting MT 4 Standard with Inverter model

Series High Tech Drilling-Milling machine with 3 visualized axes and programmable machining cycles Standard: Integrated visualizer for setting and loading cycles

TRASMISSIONI DATI TECNICI Drilling capacity on R50 steel * TCS VR option: motor 2.2/3 kW - 32/2.340 rpm and Thread-cutting unit with 24V transformer STD

DATI TECNICI Drilling capacity on R50 steel VR: Variable speed-drive unit with CI: Gear-box drive-unit

Cod. 40022:  24 Volts Halogen light. Cod. 40002:  Thread-cutting unit with 24 V transformer. Cod. 40024:  Digital speed counter Cod. 40007:  Centralized system for guide lubrication. Cod. 5355351:  Chip and drip collecting tray for TCS. Cod. 40005:  Electronic longitudinal cross-table feed for TC 36÷380 mm/ min. Rapid/feed 3 m/min. Cod. 40006:  Rapid vertical table feed Cod. 40026 Power: Mechanical longitudinal cross-table feed. Cod. 40097:  ISO 40 Spindle shaft with hydraulic lock and release system Cod. 40083:  24V Dc Electro magnetic automatic quill-feed Cod. 40025:  Read-out system for 2...

PROGRAMMABLE MANUAL MACHINING CYCLE L1 = Set of oblique holes L2 = Set of holes on circles and arhes L3= Drilling/tapping at a constant pitch L4 = Drilling/tapping at a vatiable pitch L5 = Heavy milling L6 = Surface finishing L7 = Milling of notches - keys L8 = Milling of straight shoulders L9= Search ing point 0 and checking of dimensions fAUTO'MA'Xt | Operating feed ■ Rapid Feed ■ Rapid Return ■ Tapping ■ Manual feed L1 = Drilling L2 = Drilling with rapid intermediate L3 = Drilling with chip removal L4 = Tapping L5 = Deep hole drilling L6 = Drilling deep

Official dealer SERR SERRMAC INTERNATIONAL S.r.l. Via 1° Maggio, 2 - 33070 Budoia (PN) - Italy Tel. +39 0434 671021 www.serrmac-international.it [email protected] The Company SERRMAC INTERNATIONAL S.r.l. has the right to make the needed modifications without any notice.