H IGH-PE RFORMANC E SAWI NG The micro-lubrication system SERMALUBE® has been designed and developed by SERMAS® for optimum lubrication for high-speed cutting applications (sheet, plate, ingot, billets) and surfacing aluminum plates. The SERMALUBE® technology incorporates a 5L-pressurized-oil tank supplying a minimum and constant volume of oil (from 2.5 to 26 cm3/min), precisely controlled manually or automatically by interfacing with the device control of the machine. SERMALUBE® is equipped with all components for easy integration with compressed air supply (4/6 bars - 20 NL/min) and includes its spraying nozzles device adapted to the considered sawing configuration (see pictures A and B). SERMALUBE® is compliant with semi-automatic or automatic tank-filling solutions proposed by SERMAS® (see picture C). The material is delivered with a descriptive sheet giving all necessary information for quick installation by the user. SERMAS® also offers on-site commissioning to ensure the best results with SERMALUBE® system. A. Short nozzles support for bandblade or disk (ref. S19026-2A) C. Semi-automatic tank-filling system (ref. S19025-2A) B. Long nozzles support for band-blade (ref. S19026-0A) DIAGRAM OF OIL FLOW We recommend the use of a lubricant of the range SERMACUT® to achieve the best performance with your SERMALUBE® 30,0 To allow you to test the SERMALUBE ® technology, SERMAS ® offers a ready solution for trials of up to 3 months without any commitment or additional fees, except for the simultaneous supply of lubricant in our range SERMACUT ®. Design: SYNTHESE ECA Tel.: +33 (0)4 76 90 02 73 - Photography: SERMAS INDUSTRIE