Separ of the Americas Catalog
30Pages

Diesel Fuel Filtration Bio-Diesel Compatible 201 SW 20th Street Fort Lauderdale, Fl 33315 Ph: (954) 523-9396 Fax: (954) 522-0456 www.separfilter.com contact@separfilter.com

Water Separator and Fuel Filter 1 - 2 Quick Reference Chart 3 Automatic Switchable Duplex: 18 EVO-10 Diesel Fuel Filter 19 EVO-10 Diesel Fuel Filter: Specifications 20 Diesel Priming Systems FP-301: DC Fuel Priming System 21 Diesel Hand Priming Pump 22 Diesel Maintenance Center: 24 Permanently Installed Central Location Service Point Includes fuel/water separator, oil change, and priming system Separ Filter Element Replacement Instructions 26 Separ Filter Backflushing Instructions 27

Separ 2000 Water Separator and Fuel Filter What Separ is made of ? Single and duplex systems are available from 80 GPH to 2060 GPH. The duplex switch assemblies allow element replacement while the engine is running. Heated Filter Available A water and fuel separator that is designed to accommodate newer and more demanding diesel engines. In industrial, marine, and agriculture use, the Separ 2000 series protects your engine from water and sludge. Small physical Size High flow rate Low Restriction Long life filter elements Simple installation 5-Stage filtration Backflushable The Separ 2000...

Separ 2000 Water Separator and Fuel Filter The separation and filtration process takes place according to a new, unique and patented concept, which is applied throughout all of the range. The Separ 2000 series is outstanding due its small physical size in relation to the effective flow rate. The Separ 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel lift pump. Fuel enters the filter through either port A or B depending on which is more convenient for installation, and using the plug provided to seal off the unused port....

Separ 2000 Quick Reference Chart 2000/5, 2000/5/50, 2000/10, 2000/18 = Standard clear bowl 2000/40, 2000/130 = Standard metal bowl MK = Metal bowl w/ contacts D = Clear bowl w/ metal heat deflector (RINA version) K = Clear bowl w/ contacts for water level indication KD = Clear bowl, w/ metal heat deflector and contacts water level indication H = Heated filter 12V or 24V AVAILABLE VERSIONS SINGLE UNITS SWITCHABLE UNITS SINGLE UNITS SWITCH. UNITS WEIGHT Single/ Thread Thread In and Outlet Switch. In and Outlet Clear bowl Clear bowl Clear bowl, contacts Clear bowl, heat shield SWK-2000/5/50/KD...

Separ 2000 Installation Instructions • The Separ 2000 should be installed on the suction side of the fuel system, between the fuel feed tank and the engine mounted fuel priming pump. • Install the filter in an accessible position to allow water and particulate removal and filter element change (a minimum of 4” above is required for element change). • The filter housing has two inlet and two outlet ports to give options on installation position. • The ideal position for the filter is at the same height as the lift pump. However, if the top of the fuel tank is above this position a “full...

Separ 2000 Comparison Chart Minimum space required for filter element change Minimum space required for filter element change • 634 GPH (2400 LPH) fuel/water separation efficiency = 99.9% • Minimum free wall space needed 12” W x 22” H x 9” D (304.8mm x 558.8mm x 228.6mm) • 1 element to change • 0.47 psi (0.95 in-Hg) Pressure drop [ ∆T ] • Backflushable (Cleanable) element • 2 (in & out) ports each side Separ of the Americas, LLC 201 SW 20th Street, Fort Lauderdale, Fl 33315 • 540 GPH (2044 LPH) fuel/water separation efficiency = unknown • Minimum free wall space needed 20” W x 31” H x 11” D...

• Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems. • Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow. • Low restriction reduces wear on fuel pumps and ensures full RPMs. MARINE • Backflushable (cleanable) element reduces down time and costly element changes. • Marine version with U.S. Coast Guardaccepted metal heat deflector. Shown: Industrial (left to right) 2000/5, 2000/5U Marine (left to right) 2000/5D, 2000/5UD-G Inlet / Outlet Connections Ordering...

A1 18.5” Bleed Screw (469.9mm) Lid Screw 5.51” A2 Lid (140mm) Lid Gasket 10.98” B Spring Frame (278.8mm) Filter Element 3.68” C1 10 Micron (93.5mm) 30 Micron (standard) 5.07” C2 60 Micron (stainless steel) (128.8mm) Washer 9.45” D Housing (240mm) Bowl Gasket 4.72” E Retainer Ring (120mm) Centrifuge 1.61” F Bowl Screw (41mm) Plug 1.87” G Clear Bowl (47.5mm) Drain Valve O-Ring Model Weight Drain Valve Bleed Screw Gasket SWK-2000/5 3 lbs (1.36 kg) Plug O-Ring 11 lbs Reversing Valve Assembly SWK-2000/5U (4.99 kg) Mounting Bracket Separ of the Americas, LLC 201 SW 20th Street, Fort Lauderdale,...

• Separ 2000 series water separators fuel filters are a simple solution to many different fuel related problems. • Five separate stages of filtration ensure 99.9% water separation (Certified TUV Report using SAE J1839) at maximum flow. • Low restriction reduces wear on fuel pumps and ensures full RPMs. MARINE • Backflushable (cleanable) element reduces down time and costly element changes. • Marine version with U.S. Coast Guardaccepted metal heat deflector. Shown: Industrial (left to right) 2000/5/50, 2000/5/50U Marine (left to right) 2000/5/50D, 2000/5/50UD-G Inlet / Outlet Connections...

Bleed Screw Lid Screw A2 Lid Lid Gasket B Spring Frame Filter Element C1 00510/50 10 Micron 00530/50 30 Micron (standard) C2 00560/50S 60 Micron (stainless steel) 30447 Washer D 30380 Housing 10366 Bowl Gasket E 30564 Retainer Ring 30548 Centrifuge F 30561 Bowl Screw 6408-08 Plug G 30984 Clear Bowl 10360 Drain Valve O-Ring Model Weight 30366 Drain Valve 30558 Bleed Screw Gasket SWK-2000/5/50 3.5 lbs 6408-08 Plug O-Ring (1.59 kg) 30474 Reversing Valve Assembly SWK-2000/5/50U 12 lbs (5.44 kg) 30476 Mounting Bracket Separ of the Americas, LLC 201 SW 20th Street, Fort Lauderdale, Fl 33315 Bleed...