EVO-10

EVO-10

EVO-10

Product catalog summary
Product Overview:
The EVO-10 Diesel Fuel Filter by Separ of the Americas, LLC is a water separator and primary filter designed for diesel engines. It offers a maximum flow rate of 158 GPH (600 LPH) and is suitable for various applications including construction, transportation, off-road machinery, agricultural, and trucking.

Key Benefits:
  • High separation efficiency with minimal pressure drop.
  • Easy installation and maintenance.
  • Environmentally friendly and compact design weighing 3.5 lbs.

Installation Guidelines:
The filter should be installed in the suction line between the tank and the fuel lift pump. It can be positioned at any level relative to the fuel tank. A shut-off ball valve is recommended for safety. The filter should be mounted using suitable screws, and the torque for fittings is 20 Nm or 175 in-lbs.

Operational Process:
  1. Fuel enters and rotational motion is induced.
  2. Water and particulates separate and settle at the bowl's bottom.
  3. Fuel flows to the prechamber, reducing velocity for further separation.
  4. Cleaned fuel exits to the outlet chamber.

Options and Accessories:
  • Water Sensor
  • Hand Priming Kit

Element Replacement Instructions:
  1. Loosen the central screw and remove the lid.
  2. Remove the spring cassette and filter element.
  3. Dispose of the used element responsibly.
  4. Insert a new filter element and replace the spring cassette.
  5. Secure the lid and tighten the screw to 10 Nm or 88 in-lbs.

Technical Specifications:
  • Dimensions: Various dimensions provided for different parts.
  • Part numbers and descriptions for components are listed.

Additional Information:
Technical drawings are available upon request, and the product is patent pending.
See more

Catalog excerpts

EVO-10-1

EVO-10 Diesel Fuel Filter Water Separator / Primary Filter • High separation efficiency with minimal pressure drop • Service and environment friendly • Compact design with minimal weight (3.5 lbs) • Off-Road Machinery • Agricultural Applications • Water Sensor The filter has to be installed in the suction line (in between the tank and the fuel lift pump), however it does not matter whether the filter inlet is positioned above, level with, or below the maximum fuel level in the tank for the filter to function correctly. As a safety precaution we suggest installing a shut-off ball valve with full flow diameter between the fuel The filter should be attached to the mounting surface with suitable screws through the inletsOand outlets© allow the fuel lines to be connected on the left and/or right side according to your Q Rotational motion is induced in the fuel, while passing through the internal vanes. 0 The fuel exits the internal vane system and enters O Due to the rotational energy, water and particulates separate from the fuel and settle at The fuel is guided to the filter prechamber. The large cross section of the prechamber results in the fuel flow velocity being reduced, allowing more particulate separation. Suspended particulates and the finest water droplets are caught in the pleated media of the filter element. The cleaned fuel passes to the outlet chamber. Fuel outlet. Inlet / Outlet Connections Single Unit: 22 x 1.5 mm internal thread size

 Open the catalog to page 1
EVO-10-2

Element Replacement Instructions Loosen the central tightening screw on the cover. Turn it until it reaches the stop position. EVO-10 Diesel Fuel Filter Drawing dimensions for reference only. Technical drawings available upon request. * Patent pending Release the lid with a gentle pressure and rotate it left so that it is free of the bayonet. Remove the spring cassette. Pull the filter element out of the housing using the handle. Dispose of the used filter element responsibly (according Insert the new filter element. Replace the spring cassette. Reset the cover with a gentle downward pressure...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.