Diesel Maintenance Center Permanently Installed Central Location Service Point Multi-Functional Features • Primary fuel water separatorRemoves 99.9% of water • • • • Benefits • Protects engine and augments reliability • Reduces priming time • Saves time on maintenance • Reduces waste stream and risk of oil spillage • Pumps oil into and out of engine • Increases fuel system component life (Certified TUV Report using SAE J1839) In-line manual fuel primer Drain/fill oil change system Environmentally responsible Minimal fuel flow restriction Service Side Convenience A 4” Minimum height required for filter servicing Technical Specification Filter Element 30 Micron Flow Rate 79 GPH (299 LPH) Inlet #8 O-Ring Boss Marine Version Includes bowl w/ heat shield Oil Change System - Fills and Drains Ports 1/2” Male JIC Flow Rate 3 GPM (11.3 LPM) Self Priming 5 ft (1.5 m) (wet gears) Primer Operating temp. range - 40°C to +120°C Flow .85 oz (25 mL) per stroke Pressure develops 100 psi (7 bar) Internal Diameter (I.D.) 1/2” Fitting size 1/2” Male JIC Model A B C Weight SC-550-311-12 Separ of the Americas, LLC 201 SW 20th Street, Fort Lauderdale, Fl 33315 Drawing dimensions for reference only. Technical drawings available upon request. www.separfilter.com info@separfilt