Catalogs >
Sentry Equipment >
Twist-Lock Cell Holder (TLC)

Twist-Lock Cell Holder (TLC)
2Pages

Catalog excerpts

TWIST-LOCK CELL HOLDER Twist-Lock Cell Holder Easily remove sensors without tools  Converts an NPT sensor into a Twist-Lock Bayonet style The Sentry Model TLC cell holder eliminates the need for tools to insert and remove sensors. Prevents twisted potted cables with 1/4 turn operation.  Stop pins provide for 1/4 turn insertion and removal without visual alignment  End fittings are 1/4" NPT The twist-lock cell holder saves time during calibration and maintenance. Swap sensors quickly between cell holders while troubleshooting. Assembly 1. Apply Teflon tape to sensor threads. 2. Thread adapter onto sensor with the O-ring pointed toward the sensor tip. 3. Hand tighten firmly to ensure that the adapter will not become loose when it is inserted and removed from the holder.

Open the catalog to page 1

twist-lock cell holder TECHNICAL DATA 1/2 OR 3/4 NPT SPECIFICATIONS Operating Temperature Operating Pressure Wetted Materials Copolymer Acetal, Viton PART NUMBERS TLC-075 Twist-Lock Holder with 3/4" NPT cell adapter TLC-050 Twist-Lock Holder with 1/2" NPT cell adapter It is solely the responsibility of the end-user, through its own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied, properly maintained, and limit their use to their intended purpose. Improper selection, installation,...

Open the catalog to page 2