Catalog excerpts
solid & powder Sample Chillers Steam & Water SAMPLE CONDITIONING A temperature control unit (TCU) provides controlled temperature water (coolant) to a group of secondary sample coolers in order to ensure closely controlled sample temperatures. The Sentry® TCU air-cooled sample chillers are pre-designed, pre-piped packages available in sizes from 3 to 15 tons. MODELS SENQA03 | SENQA05 | | SENQA08 | SENQA10 | SENQA15 BENEFITS With the Sentry TCU air-cooled sample chillers, all components are easily accessible for service. Each undergoes a factory run-in under a range of heat loads. Measurements are taken of critical parameters and recorded for future reference. FEATURES ■ Cools water at a precisely-controlled Uses a fan type air-cooled temperature with ±1°F (0.5°C) accuracy condenser to reject heat from the refrigeration cycle ■ Self-contained with all necessary controls, pumping and refrigeration ■ Local display provides quick systems operational snapshot NEMA 1 enclosure with disconnect SPECIFICATIONS ■ Refrigeration • Hermetically sealed scroll compressor • Full factory refrigerant charge of HFC-410A • Copper brazed 316L stainless steel evaporator • Hot gas bypass control valve for temperature control • Crankcase heater • Sealed desiccant core filter-dryer • Moisture and liquid indicator • Thermostatic expansion valve ■ Chilled Water • Stainless steel TEFC close-coupled centrifugal pump • Pressure indicator at pump discharge • Accurate to ±1°F (±0.5°C) • Adjustable make-up water pressure reducing valve • Pressure relief valve to protect pump and evaporator ■ Controller • Keypad control to run system or pump alone • Microprocessor based PID temperature control • Digital contact provided for remote system start • Digital indication of chilled water outlet temperature • Clear display of operational warnings and alarms • General fault alarm contact for remote indicator ■ Electrical • NEMA 1 enclosure with disconnect • 460 Vac / 60 Hz / 3 phase (standard) ■ Options • High air temperature (110-120°F) • Outdoor installation (NEMA 4) • Internal electric heater for additional warming of sub-cooled samples • Remote condenser • CE Sam
Open the catalog to page 1auxiliary heater 60,000 (18) 1 Cooling capacity based upon 110°F (43°C) ambient air and 76°F (24°C) coolant setpoint, 60 Hz power. 2 Note: Cooling and heating capacity is reduced about 17% for 50 Hz power. COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL = ISO 9001 = sentry-equip.com 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 | sales@sentry-equip.com © 2016 Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. It is solely the responsibility of end users, through their own testing and analysis, to...
Open the catalog to page 2All Sentry Equipment catalogs and technical brochures
-
SENTRY ISOLOK SAA SAMPLER
2 Pages
-
SENTRY SA SAMPLER
2 Pages
-
SENTRY B1 SAMPLER
2 Pages
-
SENTRY SINGLE LINE
2 Pages
-
SENTRY VREL CONTROL VALVE
2 Pages
-
SENTRY SBC CONTROLLER
2 Pages
-
SENTRY ISOLOK MSA SAMPLE
2 Pages
-
Sample Coolers
8 Pages
-
Sample Sequencer 5
2 Pages
-
DCCP Reboiler
2 Pages
-
Corrosion Product Sampler
2 Pages
-
Resin Column (RC 100)
2 Pages
-
Resin Column (RC 200/400)
2 Pages
-
Thermal Shut Off Valve (TSV)
2 Pages
-
AutoVREL
2 Pages
-
VREL
2 Pages
-
Manifold Valve
2 Pages
-
Sentry Sample Coolers
8 Pages
-
Sentry Automatic Samplers
8 Pages
-
API Sampling Suite
4 Pages
-
Sample Chiller
2 Pages
-
Sample Cooler TLR
2 Pages
-
Blowdown XC
2 Pages
-
Dual Tube Coil Sanitary
2 Pages
-
Dual Tube Coil (DTC-8)
2 Pages
-
Dual Tube Coil (DTC-4)
2 Pages
-
Dual Tube Coil (DTC-6)
2 Pages
-
Spiral Heat Exchanger
2 Pages
-
SampleCooler USC
2 Pages
-
Sample Cooler WSW
2 Pages
-
Sample Cooler TRB
2 Pages
-
Sample Cooler FXR
2 Pages
-
Sample Cooler FLR
2 Pages
-
Model MSE ISOLOK®
2 Pages
-
Model MSD ISOLOK®
2 Pages
-
Sentry MT-1 Magnetic Trap
2 Pages
-
Sentry MT-2 Magnetic Trap
2 Pages
-
Sentry MT-5 Magnetic Trap
2 Pages
-
Sentry AutoVREL Spec Sheet
2 Pages
Archived catalogs
-
Manifold Valve
2 Pages
-
TCU Water-Cooled
2 Pages
-
TCU Air-Cooled
2 Pages
-
VREL®
2 Pages
-
AutoVREL
2 Pages
-
Twist-Lock Cell Holder (TLC)
2 Pages
-
Thermal Shut-off Valve (TSV)
2 Pages
-
Resin Column RC200/RC400
2 Pages
-
Resin Column RC100
2 Pages
-
Corrosion Products Sampler
2 Pages
-
Sample Sequencer® 5
2 Pages
-
Sample Coolers
8 Pages
-
Power Generation Solutions
6 Pages
-
Spiral Tube / Tube-in-Tube
8 Pages
-
Model RPG Data Sheet 18.1.4
2 Pages
-
Model MCL Sampler IOM
1 Pages