Cross-Cut Samplers Solid & Powder Steam & Water The Sentry® SA automatic cross-cut sampler automates sampling of dry free-flowing materials such as grain, granules, powders, flakes or pellets in vertical or inclined chutes. A cross-cut sampler captures a cross section of an entire material stream and is used in situations where material segregation exists. To obtain a sample, the Sentry SA sampler's air-actuated, pelican-type head moves across the process flow in the chute and deposits it at the discharge. The sample is discharged through a flexible hose to a collection point. Material characteristics are not affected by the sampler because no moving parts convey the sample to the sample container. Sample volume can be changed at the sampler controller. MODELS SA-A | SA-E BENEFITS With representative sampling, characteristics of each sample match that of the entire lot or batch – so samples are repeatable, leading to accurate sample analysis data. Automatic sampling ensures a sample can be easily and safely obtained with no need for direct human interface or interference. This ensures sample integrity as well as operator safety. FEATURES Customized to meet various application needs Wetted components are 300 series stainless steel White nitrile seals or gaskets Kevlar® braided packing USDA, Canadian, FGIS and NOPA approved Square or round gravity chutes; 2 or 3 inch (51 or 76 mm) diameter discharge tube Dust and vapor resistant Available with pneumatic or electric actuation for flexibility Includes air filter, regulator and gauge where applicable Adjustable pelican opening available Optional wear lining in lower transition Designed to eliminate the degradation of sample material No moving parts in conveyance from sampler to container, keeping material characteristics consistent CE and ATEX compliant models available Optional release coating to ensure a non-stick surface QPQ hardening of contact surfaces available to protect against wear and abrasion Explosion proof (XP) motor available Pre-plumbed filter

Customer Line Match Drill Bolt Hole Pattern Into Both Flanges SAMPLER DIMENSIONS ARE FOR A 4-8" LINE SIZE SPECIFICATIONS materials 300 series stainless steel, white nitrile, Kevlar®, aluminum cylinder particle size 10 µm to 1/4 in (6 mm); larger sizes upon request temperature rating air pressure of 60 to 80 psi (4.1 to 5.5 bar) recommended; air usage 282 in3 (4,621 cc) per stroke suggested connection to sample discharge rigid metal or flexible tubing to a collection container or indexing cabinet inlet size recommended sampler location vertical or inclined spout determined by flow rate and aperture...