Catalogs >
Sentry Equipment >
SENTRY ISOLOK SAB SAMPLER Point Samplers

SENTRY ISOLOK SAB SAMPLER Point Samplers
1 / 2Pages

Catalog excerpts

SENTRY ISOLOK SAB SAMPLER Point Samplers - 1

SENTRY ISOLOK SAB SAMPLER Point Samplers Solid & Powder Steam & Water The Sentry® ISOLOK® SAB automatic point sampler is a larger capacity sampler that provides representative samples of liquids and slurries such as waste acid, resin bead slurry, bauxite mud and raw municipal sludge. The ISOLOK SAB sampler operates when compressed air forces the plunger into the process line to capture a fixed volume of material. Compressed air then acts on the opposite side of the piston to retract the plunger to a position which allows the sample to drop by gravity into a container. MODELS ISOLOK SAB BENEFITS The Sentry ISOLOK SAB sampler seal design isolates the operator from the process at all times, with the sample captured in the container "locked out" from external influences. Metal parts of the sampler are made of 316 stainless steel; other alloys are available for varied applications and process conditions. Process contact seals are filled Teflon for chemical applications or wear-resistant elastomers for abrasive slurries. Modular components allow selection of various bodies and plungers to meet different process applications. FEATURES Two different models for sampling fixed volumes of 10 cc or 25 cc per sample cycle Handles line pressures from vacuum up to 300 psi (20.7 bar) in most applications Rugged 316 stainless steel construction Batch or composite sampling Options include port closures, different container types, sampler enclosures (with or without heater), sample heating or refrigeration, and optional materials of construction and seal choices ATEX-complia

Open the catalog to page 1

SENTRY ISOLOK SAB SAMPLER Point Samplers - 2

SPECIFICATIONS sample volume per cycle maximum cycle frequency 10 strokes per minute, depending on application maximum particle size line mounting options MNPS thread, tri-clamp, instrument hub, bolted hub, ANSI flange 316 stainless steel; other materials available cylinder seals plunger seals TFE, polyurethane, EPDM rubber, Kalrez® or custom shipping weight Kalrez is a registered trademark of E. I. Du Pont de Nemours and Company. Halar is a registered trademark of Ausimont, U.S.A. Inc. sentry-equip.com 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 |...

Open the catalog to page 2