Sample Coolers
8Pages

{{requestButtons}}

Catalog excerpts

Sample Coolers - 1

Sentry Sample Coolers The largest selection of models offered by any manufacturer Water | Steam | Liquid | Slurry

Open the catalog to page 1
Sample Coolers - 2

Cool, Heat or Condense Any Sample Sentry Equipment has more types of sample coolers than any other manufacturer. Flows from 0.25 gal/hr (1 L/hr) to 100 gal/min (378 L/min) and pressure/temperature ratings up to 5,000 psi (345 bar) and up to 1100° F (593° C) are available using single tube helical coil, multi-tube spiral tube, or tube-in-tube heat exchanger designs. A variety of international certifications are available for most of our sample cooler products including ASME and CRN. Note: Sentry sample coolers are exempt from CE marking per Pressure Equipment Directive 2014/68/EU, TÜV....

Open the catalog to page 2
Sample Coolers - 3

shell material area shipping weight models shell design tube design

Open the catalog to page 3
Sample Coolers - 4

SENTRY TRB SERIES The TRB sample cooler is generally used in low pressure boiler application where a small volume of sample is required. model shell design tube design tube material shell material area shipping weight part number

Open the catalog to page 4
Sample Coolers - 5

Spiral Tube SENTRY SPIRAL TUBE A spiral tube heat exchanger is a spirally coiled tube and manifold assembly fitted into a compact shell that optimizes heat transfer efficiency and space. The spiral shape of the coil and shell flow paths creates centrifugal force that enhances heat transfer on both sides in a true counterflow arrangement. By varying the number, diameter and length of the coiled tube, efficiency and footprint can be optimized versus traditional shell and tube designs. • Flow rates to 100 gpm (378 L/min) • Sample conditions up to 5000 psi (345 bar) and up to 1000°F (540°C) •...

Open the catalog to page 5
Sample Coolers - 6

SENTRY TUBE-IN-TUBE DTC SERIES Sentry Dual Tube Coil (DTC) products are helically wound, full counter flow heat exchangers— well-suited for a variety of applications where low flow rates of high pressure and/or temperature fluids need heating or cooling. A variety of inner and outer tube sizes are available to meet most application requirements. • Flow rates to 3 gpm (11.4 L/min) • Sample conditions up to 6000 psi (414 bar) and up to 1100° F (593° C) • Single continuous tube • Fully drainable • Highly resistant to thermal and hydraulic shock • Sanitary model available • Copper, 316 SS,...

Open the catalog to page 6
Sample Coolers - 8

The Sentry Advantage Running an efficient operation requires careful analysis of controlled, real-time data achieved through reliable, accurate and repeatable process monitoring and measuring. By effectively conditioning, sampling and measuring gas, liquid, slurry, powder, solids, steam, or water within their production environments, our customers obtain the critical insights they need to control and optimize processes. Driving operational efficiency by obtaining and analyzing critical data is at the heart of what we have been doing since 1924. Our proven representative sampling techniques...

Open the catalog to page 8

All Sentry Equipment catalogs and technical brochures

  1. AutoVREL

    2 Pages

  2. VREL

    2 Pages

  3. Blowdown XC

    2 Pages

Archived catalogs

  1. VREL®

    2 Pages

  2. AutoVREL

    2 Pages