Sample Cooler FXR
2Pages

{{requestButtons}}

Catalog excerpts

Sample Cooler FXR - 1

SENTRY FXR SINGLE HELICAL TUBE Sample Coolers Liquid & Slurry Solid & Powder Steam & Water The Sentry® FXR sample cooler cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube in a shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then is taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents. MODELS FXR-6222 | FXR-6222U | FXR-6225 | FXR-62B3 BENEFITS The Sentry FXR sample cooler is designed for efficient and cost-effective sample cooling where higher flow is required. It offers optimal service for flows below 5000 cc per minute for single phase and 2000 cc per minute for condensing heat transfer. Standard tube side materials are 316/316L SS or Alloy 625 for high chloride cooling water applications. FEATURES Double-wound helical coil design Minimize cooling water needs Mounting bracket can be installed without removing flange bolts Retained shellside gasket reduces reassembly time PERFORMANCE CURVE - WATER PERFORMANCE CURVE - STEAM Lbm/Hr Flow Rate Lbm/Hr Flow Rate Surface Area 4.7 Ft.2 [0.44 m2 ] 12 GPM [45 L/min] Cooling Water at 95oF [35oC] 9.5 PSI [0.66 Bar] Pressure Drop Surface Area 4.7 Ft.2 [0.44 m2] 12 GPM [45 L/min] Cooling Water at 95oF [35oC] 9.5 PSI [0.66 Bar] Pressure Drop Wide variety of exotic alloys for corrosion resistance Formed shell eliminates top shell flange weld interfaces

Open the catalog to page 1
Sample Cooler FXR - 2

13⁄16" [30 mm] ¾" FNPT cooling water outlet 1½" [37 mm] 1⅟16" [26 mm] ¾" FNPT alternate cooling water inlet 5⅝" [143 mm] Sample Inlet ⅜" OD tube Sample Outlet ⅜" OD tube 5¼" [133 mm] (supplied with each cooler) ¾" FNPT cooling water inlet SPECIFICATIONS models shell design tube design tube material shell material shipping weight NOTES: • U in model number denotes ASME stamped model. • Canadian Registration Number available for ASME stamped models only. Consult factory for CRN and other options and information. • Vessels are exempt from CE marking per PED 97/23/EC, TÜV. Vessels are below or...

Open the catalog to page 2

All Sentry Equipment catalogs and technical brochures

  1. AutoVREL

    2 Pages

  2. VREL

    2 Pages

  3. Blowdown XC

    2 Pages

Archived catalogs

  1. VREL®

    2 Pages

  2. AutoVREL

    2 Pages