SENTRY ISOLOK SAK SAMPLER Point Samplers Solid & Powder Steam & Water The Sentry® ISOLOK® SAK automatic point sampler provides a simple, reliable means of collecting representative samples of flowable powders, flakes or granules. Materials such as salt, cement, fertilizer, alumina, gypsum, and food products are sampled from process streams. An auxiliary top body port enables air ejection of non-free-flowing materials. An air cylinder extends a single plunger into the process material, then immediately withdraws, carrying a fixed amount of sample trapped in an annular ring between plunger seals. Process or flow ports are always closed, preventing leaks or product loss. There are no tubes or passages to become clogged. The gravity-discharged sample is transferred directly to a closed container. MODELS ISOLOK SAK BENEFITS The Sentry ISOLOK SAK sampler seal design isolates the operator from the process at all times, with the sample captured in the container "locked out" from external influences. The samplers can be used for composite, batch or analysis sampling techniques. Composite sampling is accomplished by obtaining a series of precisely measured material samples at set intervals or adjusted in response to product flow. Samples can be collected in shared or individual containers. Batch or analysis sampling in response to immediate need or on-line process control interface is facilitated using single or rapid-cycling material withdrawal. A complete line of programmable automatic sampler controllers is available for use in general purpose as well as hazardous environments. FEATURES Collects samples from slide or vertical drop chutes or direct from open processes Single moving part collects accurate and repeatable 16 or 18 cc sample volume Simple gravity-discharge design for powder, flakes or pellets up to 11/32 inch (9 mm) without shearing or degrading sample material Rugged 316 stainless steel construction features chrome-hardened body bore Field-replaceable, application-specific seals include EPDM, polyurethane elastomers and more Tri-clamp mating ferrules and 2-inch (5 cm) smooth-bore mounting port for easy installation and maintenance ATEX-compliant

SENTRY ISOLOK SAK SAMPLER > POINT SAMPLERS > AUTOMATIC SAMPLING DISCHARGE PORT Teflon is a registered trademark of E. I. Du Pont de Nemours and Company. 966 Blue Ribbon Circle North, Oconomowoc, Wl 53066 U.S.A. | +1-262-567-7256 | [email protected] ©2016 Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. It is solely the responsibility of end users, through their own testing and analysis, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied...