Automatic & Manual Samplers For Liquids, Slurries & Gases Isolok® • Low-E • Controllers More Than 85 Years of Sampling Experience

automatic isolok® samplers Automatic samplers allow batch or composite sampling. • 3 cc to 8 cc sample volume per cycle • Process pressure: vacuum to 200 psig (14 barg) • 10 cc to 25 cc sample volume per cycle • Process pressure: vacuum to 300 psig (21 barg) Model SAL-Q • 10 cc or 25 cc sample volume per cycle • Delta Knife Gate Valve enables sampler removal while process remains in service • Process pressure: 300 psig (20.7 barg) to 400 psig (27.5 barg) Model SAL-B • Up to 25 cc sample volume per cycle • ISOVALVE® allows sampler to be easily removed for inspection or servicing while process...

manual LOW-Emissions samplers Manual samplers that ensure maximum safety to the operator and the environment. • Double block valve gives built-in speed loop capability • Adjustable throttling stop and spring return for safety • One piece process and vent needle assembly is replaceable without sampler disassembly • Non-coring side discharge needles allow complete resealing of the septum when the bottle is withdrawn from the sampler • Wide variety of bottle, septum and needle/tube stub arrangements and sizes Model MCL (liquids) and MCG (gases) • Continuous flow of sample assures representative...

manual LOW-EMISSIONS SAMPLERS Manual samplers that ensure maximum safety to the operator and the environment (continued from page 3) • Contemporary samples without a speed loop or bypass • Eliminates sample waste by back purging old sample from sample line • Sampler and sample line are purged in each sample cycle, ensuring a representative sample Controllers Model SBC Automatic Sampler Controller • Dedicated logic control system capable of controlling any automatic sampler in the Sentry product line • Features both Local and Remote operating modes • Operator-friendly user interface • Customize...