Gas Liquid & Slurry Solid & Powder SENTRY SANITARY TUBE-IN-TUBE DTC SERIES Heat Exchangers Steam & Water Sentry® sanitary DTC (dual tube coil) tube-in-tube heat exchangers are spirally wound, full counter flow heat exchangers well suited for a variety of applications where low flow rates of high temperature and/or high pressure fluids that require a high level of purity need cooling or heating. MODELS DTC-SSG/SSC-6-4-1 DTC-SSG/SSD-8-4-1 BENEFITS The sturdy tube-within-a-tube concept uses heavy duty terminal fittings to provide for a plain tube end interface for the inner tube, and a compression connection for the outer tube. The plain end of the inner tube is easily adapted to a variety of connections including compression, threaded, socket weld, sanitary clamp and many more. The tube-within-a-tube design also provides for high pressure/temperature capabilities on both sides of the heat exchanger, providing greater application flexibility. The single continuous inner tube increases reliability and cleanliness and allows the unit to be completely drainable. Fully drainable inner and outer coils Spiral wound for maximum counterflow efficiency Constant fluid velocity No dead spots or crevices Interior surface finish of Ra ≤ 20 Excellent for multi-phase/multicomponent fluids and slurries Highly resistant to thermal and h

Surface Area 1.90 Ft.2 [0.18 m2] 5 GPM [18.9 L/min] Cooling Water 95oF [35oC] 18 PSI [1.2 Bar] Pressure Drop SPECIFICATIONS inner tube design* outer tube design inner tube material outer tube material * Inner tube rating based upon tri-clamp connector and gasket material used sentry-equip.com 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 | [email protected] © 2015 Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. It is solely the responsibility of end users, through their own testing and analysis,...