MB
2Pages

Catalog excerpts

MODEL MB# Analog-Readout RoHS CompliantStandard Dimensions Dial ► Analog ■ Model MB10-25B Note:The diameter of Sthole is depending on the diameter of potentiometer to be mounted. General Specifications Model No • Special Specifications Available 0 Special colors on housing and spin plate on the top of the knob (Black, etc.) How to mount MB Series In the case of mounting Model MB Series counting dials on Helicalohm pot., the mounting adaptor and Helicalohm potentiometer are fixed on the panel according to the illustration given the above. The shaft of the Helicalohm pot. is turned anticlockwise to its limit and is put into the mounting hole of the dial which is already set at "0". The shaft of the Helicalohm pot. is secured by the screw positioned on the knob of the dial. With this, the mounting is completed. 46 V SHANGHAI SIBO M & E CO.,LTD. www.sakae.cn

Open the catalog to page 1

Mounting Adaptor for use with MB Series The inner diameters of the mounting adaptor is different to the diameters of the shaft of the poteniometers to t be mounted and therefore, please use the mounting adaptor supplied with the dial itself. When mounting the dial on potentiometer, the 2-finger proecions ( ＊ ) j t of mounting adaptor are inserted in the receiving holes prepared on the base plate of dial firmly, by adjusting the gap between 2-finger projection ( ＊ ) with a screwdriver. There is possibility where some irregular turns of dial may take place if the adjustment of this gap is...

Open the catalog to page 2

MB 2Pages

Catalog excerpts

All SENTOP by Shanghai Sibo M&E Co. catalogs and technical brochures

MB
2Pages