Standard Dimensions and Compliance
The document outlines the standard dimensions and compliance features of the LSM22 model, which is an inductance type and RoHS compliant device.

Model Specifications
The LSM22 model is available in three variants: LSM22-10-5, LSM22-20-5, and LSM22-30-5. Each variant has different mechanical and electrical stroke lengths, with mechanical strokes of approximately 14mm, 24mm, and 34mm, and effective electrical strokes of approximately 10mm, 20mm, and 30mm, respectively.

Electrical Characteristics
- Current Consumption: Approximately 5mA
- Applied Voltage: 5V D.C.
- Load Resistance: Minimum 10kΩ
- Output Voltage Range: Approximately 10% to 90% of Vin
- Output Temperature Characteristic: Within ±2.5% Vout FS
- Drift at Center Position: Within ±0.5% Vout FS

Environmental Specifications
- Operating Temperature Range: -40°C to +105°C
- Storage Temperature Range: -40°C to +105°C
- Thermal Shock: 5 cycles between -50°C and +105°C
- Exposure at Low Temperature: 24 hours at -50°C
- Exposure at High Temperature: 1,000 hours at +105°C
- Moisture Resistance: 40°C, 95% RH for 120 hours
- Vibration: 10 to 2,000Hz, 196m/s² for 12 hours
- Shock: 980m/s² (18 times)

Mechanical and Physical Characteristics
- Mass: Approximately 30g, 40g, and 60g for each model variant
- Friction: Within 0.1N (10gf)
- Life Expectancy: Approximately 50,000,000 shaft reciprocating motions
- Protection Grade: IP40

Additional Features
The LSM22 model incorporates a spring return device and offers the possibility of special specifications upon consultation. It is important to note that general and environmental specifications may change with special specifications.

Installation Notes
Each unit comes with an inner teeth washer and hex nut. For applications involving continuous vibration or shock, it is recommended to support the rear part of the unit with a fixing device.