标准尺寸 / Standard Dimensions Φ55 在X，Y轴上各带一个微型开关 的情况下 / In the case 1 pc of micro-switch is incorporated for each X and Y direction. ※3 0° ~35 ° 带5个微型开关，其中1个 用于探测中心位置 / With 5 micro swiches and 1 or them is for detecting the center position ◆ 电位器外置型 Potentiometer outside-mounted type ◆ 导电塑料型 With conductive plastic element 操纵杆把手带开关 Joystick knob with switch 45° Φ55 注Note1：在Q型的情况下，为360°方形操作，标记※的角 度为自中心位置起约±20°～25°。/ In the case of type Q, the angle of mark “※” becomes 360° square-direction and ±20° ～±25°from center position. 注Note2：在使用102A把手的情况下，安装了除标准电位器 SFCP22E 以外的其他部件，标记※※的尺寸会有变化。/ In the cace of JC with knob type 102A, if other components, except our standard pot model SFCP22E, are mounted, the position of mark “ ※※ ” may be changed to other position. 标准型 / 双轴调节型 Standard 2-dimensional coordinate type 操纵杆把手不带开关 Joystick knob without switch 4-Φ3.5 孔 hole M3-4安装螺丝的位置 Fixing screw M3-4 positions 深depth12 X轴上的电位器 Potentiometer for X-axis 安装面板 / Panel Arangements 带中心位置探测开关的情况下 In case of with a switch incorporated for detecting center position. 注Note3：附4个M3x14的安装螺丝。/ 4 pcs. of mounting screw (M3×14) are attached. 单位Unit：mm 选型指导 / Selection Guide S 不适用于我们标准的特殊机械规格 / Special mechanical specifications not applicable to our standards G - 00000 特殊编号：用于特殊的客户需求 / Special 4/5-digit part number: For customized products 50 底部外壳的大概尺寸，以mm为单位 / Approx. size of base housing in mm 安装部件 / Mounting accessories G 带防尘罩 / With dust proof rubber cover P 带安装面板 / With sub-panel for mounting J 操纵杆控制器 / Joystick controller 弹簧复位装置 / With spring return device R1 单轴调节带弹簧复位装置 / With spring return device for 1-dimensional coordinate R2 双轴调节带弹簧复位装置 / With spring return device for 2-dimensional coordinate 无 不带弹簧复位 / Without spring return device, with friction locking 类型 / Kind of types C 单轴和双轴调节型可选，外置电位器，标准型带防尘罩 和弹簧复位装置 / 1 and 2-dimensional coordinates is available and also means potentiometers outsidemounted type. Dust proof rubber cover and spring return device are available as standard version 内置开关数量 / Number of switches to be incorporated 0 不带开关 / no switch incorporated 1 1个开关 / 1 switch incorporated 2 2个开关 / 2 switches incorporated 3 3个开关 / 3 switches incorporated 4 4个开关 / 4 switches incorporated 5 5个开关 / 5 switches incorporated 6 6及6以上开关 / 6 and over 6 switches incorporated 9 您其他的开关需求 / Other switches to your special request

一般性能 / General Specifications 双轴操纵杆：全方位操作约±30°～±35°（自中心位置） / 2-dimensional coordinate type: Omni-directionally approx. ±30°～±35° operation from center position 操纵杆的控制范围 Controlling range of operating lever 带弹簧复位装置：自复位到中心位置（全方位操作） / With spring return device: automatically return to center (omni-directionally) 约 Approx. 3～15N (300～1,500gf.) 操作压力 Operating force 操作温度范围 Operating temperature range 预期寿命 Mechanical life expectancy 电气性能 / Electrical Specifications SFCP22E（导电塑料电阻 / Conductive plastic resistive element） （所有的接线端都适合AMP110系列的固定插座(2.8 × 0.5mm)或同类插座 / All terminals can be fitted with Tyco110...