标准尺寸 / Standard Dimensions M3-4安装螺丝的位置 Fixing screw M3-4 positions 深depth12 三轴调节型 3-dimensional coordinate type 注Note : 在带防尘罩的情况下，※部分的尺寸变为Φ44mm。 In case of JC with dust proof rubber cover, the dimensions of“※" part changes to Φ44 mm hole. 在X轴带微型开关的情况下 In case microswitches are incorporated on X direction 在X轴带弹簧复位装置的情况下 In case of spring return device. which returns lever shaft to X direction 在Y轴带微型开关的情况下 In case microswitches are incorporated on Y direction 在X轴带弹簧复位装置的情 况下 / In case of spring return device, which returns lever shaft to Y direction 装饰面板（黑色） Dress panel (Black color) ◆ 电位器外置型 Potentiometer outside-mounted type ◆ 导电塑料型 With conductive plastic element 标准型 / 双轴调节型 Standard 2-dimensional coordinate type X轴上的电位器 Potentiometer for X-axis Y轴上的电位器 Potentiometer for Y-axis 安装面板 / Panel Arangements 三轴调节T型操作， 把手（301型）尺寸图 Dimensional drawing of knob for 3-dimensional coordinate Z-axis T type. (Type 301) 注Note 1：在带防尘罩的情况下，装饰面板尺寸和※部分 的尺寸参考括号中的数值。 / In the case of JC with dust-proof rubber cover, the dimensions of dress panel and ※part dimension shall be changed numbers in parentheses. 注Note 2：在Q型、R型和U型的情况下，为360°方形操 作，标记※※的角度为自中心位置起约±20°～25°。 / In the case of type Q, R and U, the angle of mark “※” becomes 360°square-directional and 20°～25°from center position. 注Note3：附4个M3x14的安装螺丝。 / 4 pcs. of mounting screw (M3×14) are attached. 带中心位置探测开关的情况下 In case of with a switch incorporated for detecting center position. 单位Unit：mm 选型指导 / Selection Guide S 不适用于我们标准的特殊机械规格 / Special mechanical specifications not applicable to our standards 50 底部外壳的大概尺寸，以mm为单位 / Approx. size of base housing in mm G - 00000 特殊编号：用于特殊的客户需求 / Special 4/5-digit part number: For customized products 安装部件 / Mounting accessories G 带防尘罩 / With dust proof rubber cover P 带安装面板 / With sub-panel for mounting J 操纵杆控制器 / Joystick controller 类型 / Kind of types A 单轴、双轴和三轴调节型可选，外置电位器 / 1-,2-, or 3-dimensional coordinates is available and also means potentiometers are mounted outside housing case K 方形 / Square shape 机械类型 / Mechanism X 单轴调节型 / 1-dimensional coordinate Y 双轴调节型 / 2-dimensional coordinate Z 三轴调节型 / 3-dimensional coordinate 操纵杆的可选操作方向 / Available directions of lever operation O 360°全方位操作（标准型） / Omni-directional 360°operating type (Standard version) I Y轴上"前后"型操作 / I figure (Y) directional operating type L X、Y轴上"L"型操作 / L figure(+Y, +X only) directional operating type X X、Y轴上"十字"型操作 / Cross direction(+) of X and Y operating type Q 360°方型操作 / Square-directional 360°operating angle Z 除了360°全方位操作范围外，还可以通过旋转把手进行第三轴操作，标准型是在操纵杆本体侧面安装电位器，也 可以根据要求在旋转把手的内部安装（T型） / In addition to omni-directional 360°operation, this type is 3dimensional coordinate operation by rotating knob in which a potentiometer is mounted on the body side of joystick, and this is standard version, and also can be incorporated inside the rotating knob(T type) on request R 除了360°方型操作范围外，还可以通过旋转把手进行第三轴操作，标准型是在操纵杆本体侧面安装电位器，也可 以根据要求在旋转把手的内部安装（U型） / In addition to square-directional 360°operation, this type is 3dimensional coordinate operation by rotating knob in which a pot

一般性能 / General Specifications 操纵杆的控制范围 Controlling range of operating lever 操作压力 Operating force 双轴调节型 / 2-dimensional coordinate type： 约 Approx. ±30°～±35°全方位操作自中心位置 / Omni-directionally, operation from center position 三轴调节型 / 3-dimensional coordinate type： 约 Approx. 320° 除了双轴操作范围外，通过把手进行旋转 / Rotation by knob-operation in addition to the controlling range of 2-dimensional coordinate operation （在弹簧中心复位装置的情况下 / In case of center-returning type with spring return device： 操作范围为±45°～±50° 自中心位置 / The operating range is approx. ±45°～±50° from center position） 不带弹簧复位装置 / Without spring return device：...

其他可选把手 / Other Optional Knobs 特殊可选规格 / Special Specifications Available 其他机械规格 Other Mechanical Specifications 其他电气规格 Other Electrical Specifications 弹簧复位装置、防尘罩、安装面板、电位器“0”位调节机械、特殊的把手形状和制动机械 Spring return device, dust proof rubber, sub-panel for mounting, potentiometer's "0" position adjusting mechanism, special knobs shapes and detent mechanism 微动开关、改变电位器阻值、电位器带中心抽头、中心位置探测开关和把手内置开关 Micro switch, alteration of potentiometer's total resistance value, intermediate tap of potentiometer, center position detecting switch and switch incorporated inside knob (当产品带特殊规格时，其一般机械/电气性能和环境性能可能发生改变，请预先同思博确认。...