标准尺寸 / Standard Dimensions 安装面板 / Panel Arangements 2-Φ5.5 孔 hole 带圆形把手和安装面板 With round shaped knob 2个安装螺孔 的位置 Set-screw hole at 2 positions M5 操作方向（I型） Direction of operation lever (type I) ◆ 低价位 Low-cost ◆ 单轴调节型 1-dimensional coordinate ◆ 导电塑料型 With conductive plastic element 装饰面板 （黑色） Dress panel (Black) 1~2安装面板厚度 Fixing panel thickness 把手自复位到 20°~25° 20°~25° 中心位置 Knob automatic Φ12 return to center 带扁平把手和安装面板 带防尘罩，圆形把手和安装面板 With dust proof rubber cover With flat shaped knob and round shaped knob 14 30JLK-XI-10R1 (标准型号 Standard version) 导线长约300mm （AWG20） Lead wire for pot. is abt. 300mm long. 注：附2个M5×12的 安装螺丝 Note: 2pcs of mounting screw (M5x12) are attached 单位Unit：mm 选型指导 / Selection Guide S 不适用于我们标准的特殊机械规格 / Special mechanical specifications not applicable to our standards G - 00000 特殊编号：用于特殊的客户需求 / Special 4/5-digit part number: For customized products 30 底部外壳的大概尺寸，以mm为单位 / Approx. size of base housing in mm J 操纵杆控制器 / Joystick controller 类型 / Kind of types L 单轴调节型 / 1-dimensional coordinate and low-cost 安装部件 / Mounting accessories G 带防尘罩 / With dust proof rubber cover R 带圆形把手 / With round shaped knob H 带扁平把手 / With flat shaped knob P 带安装面板 / With sub-panel for mounting 弹簧复位装置 / With spring return device R1 单轴调节带弹簧复位装置 / With spring return device for 1-dimensional coordinate type

一般性能 / General Specifications ±20°～± 25°（自中心位置 From center position） 操纵杆的控制范围 Controlling range of operating lever 带弹簧复位装置：自复位到中心位置 / With spring return device: automatically return to center 约 Approx. 1～2.5N (100～250gf) (带防尘罩 With rubber cover：约 Approx. 1～5.5N (100～550gf)) 操作压力 Operating force 操作温度范围 Operating temperature range 预期寿命 Mechanical life expectancy 电气性能 / Electrical Specifications 内置30JL系列专用的特殊导电塑料电阻 / Special conductive plastic resistive element is exclusively used for 30JL series 安装的电位器 Potentiometers mounted 阻值 Resistance value 独立线性公差 Independent linearity tolerance 电气转角 Electrical...