标准尺寸 / Standard Dimensions 安装面板 / Panel Arangements 45° X和Y轴操纵杆，带自复位到 中心位置的弹簧复位装置 Operating lever for X and Y axes with auto-return device to the center position 4-Φ3.5 孔 hole 外径Φ6.2反钻 Outer Φ6.2 counterbore Z轴方向 For Z axis direction 安装面板 Mounting panel 安装面板厚度 Thickness of panel 1~4 连接X,Y,&Z轴的导线 长约300mm (AWG26) Lead wires for X,Y&Z axes abt.300mm long (AWG26) ◆ 电位器内置型 Potentiometer incorporated type ◆ 导电塑料型 With conductive plastic element Z轴方向 For Z axis direction 标准型 / 三轴调节型 Standard 3-dimensional coordinate type Z轴带翘板把手，带自复位到 中心位置的弹簧复位装置 Seesaw knob for Z axis with auto-return device to the center position 注Note1: 附4个M3x8安装螺丝。 4pcs. of mounting screw (M3x8) are attached. 选型指导 / Selection Guide S 不适用于我们标准的特殊机械规格 / Special mechanical specifications not applicable to our standards 特殊编号：用于特殊的客户需求 / Special 4/5-digit part number: For customized products 100 底部外壳的大概尺寸，以mm为单位 / Approx. size of base housing in mm 安装部件 / Mounting accessories G 带防尘罩 / With dust proof rubber cover J 操纵杆控制器 / Joystick controller 类型 / Kind of types B 三轴调节型，内置电位器/ 3-dimensional coordinate pot. inside incorporated low cost type 弹簧复位装置 / With spring return device R3 三轴调节带弹簧复位装置 / With spring return device for 3- dimensional coordinate type 内置开关数量 / Number of switches to be incorporated 0 不带开关 / no switch incorporated

一般性能 / General Specifications 操纵杆的控制范围 Controlling range of operating lever 双轴调节型 / 2-dimensional coordinate type： 约 Approx. ±20° ～ ±25°全方位操作自中心位置 / Omni-directionally, operation from center position 三轴调节型 / 3-dimensional coordinate type： 除了双轴操作范围外 ，约 Approx. ±15°～±19°自翘板电位器中心位置 / Operation from the center position of the seesaw knob, in addition to the controlling range of 2-dimensional coordinate type 带弹簧复位装置：自复位到中心位置（标准型） / With spring return device (standard): automatically return to center X、Y轴（标准型为带两根弹簧，带导向）/ With 2 springs (with directive feeling) as standard version: 约 Approx. 0.8～2.3N...