*mydirectindustry

FCP50A

Product catalog summary

Overview: The document provides technical specifications for the Model FCP50A, a conductive plastic potentiometer with servomount and RoHS compliance.

General Specifications:

Standard Resistance Values: 1k, 2k, 5k, 10k ohms
Special Practical Resistance Values: 500, 20k, 50k, 100k, 200k, 500k ohms
Total Resistance Tolerance: ±10%
Independent Linearity Tolerance: Standard Class ±0.5%, Precision Class ±0.2%, Super Precision Class ±0.05%
Resolution: Essentially infinite
Output Smoothness: Within 0.1% against input voltage
Contact Resistance Variation: Within 2% C.R.V.
Power Rating: 3.0W
Electrical Travel: 350°±5°
Mechanical Travel: 360° (Endless)
Insulation Resistance: Over 1,000MΩ at 1,000V.D.C.
Dielectric Strength: 1 minute at 1,000V.A.C.
Starting Torque: Within 4mN・m (40gf・cm)
Resistance Temperature Coefficient: ±400p.p.m./℃
Mass: Approx. 70g

Additional Features:

Extra taps available up to 3
Multi-ganged option available up to 7 gangs, with housing length extended by 12mm per gang
Shaft with front and rear extension (Rear shaft: 6mm dia., 15mm length)
With stopper (Rotating angle: 320°, stopper strength: 0.9N・m [9kgf・cm])
Special electrical travel and shaft diameter (6.35mm) with inch dimension
Special machining on the shaft

Note: For potentiometers with special specifications, general and environmental specifications may change. Consultation is advised.

Catalog excerpts

MODEL FCP50A Conductive Plastic Servomount RoHS Compliant Standard Dimensions General Specifications 1-Turn ► Contact type ► Conductive plastic Standard Resistance Values Contact Resistance Variation # Special Specifications Available (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) Extra taps (Available up to 3 taps) 0 Multi-ganged (Available up to 7 gangs, Housing length is extended by 12mm per 1 gang) Shaft with front and rear extension (Rear shaft with 6mm dia. and 15mm length) With stopper (Rotating angle is 320° and stopper strength is 0.9N • m [9kgf • cm]) 0 Special electrical travel 0 Shaft dia. (<t> 6.35mm) with inch dimension 0 Special machining on the shaft "shanghai sibo m & e CO.,ltd.

Open the catalog to page 1

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures

Archived catalogs

JOYSTICK 100JB
2 Pages
FCPS22AC
2 Pages
FCP22AC
2 Pages
JOYSTICK 30JL
2 Pages
JOYSTICK H30JH
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list