MODEL FCP22EConductive Plastic # Bushingmount # Low-cost Item RoHS Compliant U.S.A. PAT. No.4400687 F.R.G. PAT. No.3136765 HONGKONG PAT. No.751 of 1984 U.K. PAT. No.2087160 FRANCE PAT. No.8118538 SINGAPORE PAT. No.372/84 Standard Dimensions Model FCP22E (Plastic Housing) General Specifications # Special Specifications Available Note: 1.1 pc. each inner teeth washer and hex nut are attached. 2. Please process the mounting hole on the panel. The diameter should be 10.32mm+ 0.05. o (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) Extra tap (Available up to 1 tap) 0 Shaft with front and rear extension (Rear shaft with 6mm dia. and 20mm length) Multi-ganged (Available up to 10 gangs) 0 With stopper (Rotating angle is 320° and stopper strength is 0.6N • m [6kgf • cm]) 1-Turn ► Contact type ► Conductive plastic Standard Resistance Values Contact Resistance Variation Model FCP22R (Plastic Housing) General Specifications 0 Special electrical travel 0 Shaft dia. (<j> 6.35mm) & bushing with inch dimension 0 Special machining on the shaft Note: 1.1 pc. each inner teeth washer and hex nut are attached. 2. Please process the mounting hole on the panel. The diameter should be 10.32mm+°05. Contact Resistance Variation # Special Specifications Available (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) 0 Extra tap (Available up to 1 tap) 0 Special electrical travel 0 Shaft dia. (<j> 6.35mm) & bushing with inch dimension 0 Special machining on the shaft >|r SHANGHAI SIBO M & E CO.,LTD.