*mydirectindustry

FCP22E

Product catalog summary

Overview: The document provides technical specifications for two models of conductive plastic potentiometers, FCP22E and FCP22R, highlighting their features, specifications, and compliance with RoHS standards.

Specifications:

Standard Resistance Values: 1k, 2k, 5k, 10k ohms.
Special Practical Resistance Values: 500, 20k, 50k, 100k ohms.
Total Resistance Tolerance: Standard Class ±15%, Precision Class ±10%.
Independent Linearity Tolerance: Standard Class ±1.5%, Precision Class ±1.0%.
Resolution: Essentially infinite.
Output Smoothness: Within 0.1% against input voltage.

Mechanical Features:

Extra Tap: Available up to 1 tap.
Shaft: Front and rear extension with rear shaft 6mm diameter and 20mm length.
Multi-ganged: Available up to 10 gangs.
Stopper: Rotating angle is 320° with stopper strength of 0.6N・m (6kgf・cm).
Special Electrical Travel: Customizable.
Shaft Diameter: 6.35mm with bushing in inch dimension.
Special Machining: Available on the shaft.

Electrical Specifications:

Contact Resistance Variation: Within 2% C.R.V.
Power Rating: 1.0W.
Electrical Travel: 320°±5° for FCP22E, 340°±5° for FCP22R.
Mechanical Travel: 360° (Endless).
Insulation Resistance: Over 1,000MΩ at 500V.D.C.
Dielectric Strength: 1 minute at 500V.A.C.
Starting Torque: Within 5mN・m (50gf・cm).
Resistance Temperature Coefficient: ±400p.p.m./°C.
Mass: Approx. 20g.

Notes:

Each unit comes with an inner teeth washer and hex nut.
Mounting hole on the panel should be processed to a diameter of 10.32mm.

Patents: The models are patented in the USA, FRG, Hong Kong, UK, France, and Singapore.

Catalog excerpts

MODEL FCP22EConductive Plastic # Bushingmount # Low-cost Item RoHS Compliant U.S.A. PAT. No.4400687 F.R.G. PAT. No.3136765 HONGKONG PAT. No.751 of 1984 U.K. PAT. No.2087160 FRANCE PAT. No.8118538 SINGAPORE PAT. No.372/84 Standard Dimensions Model FCP22E (Plastic Housing) General Specifications # Special Specifications Available Note: 1.1 pc. each inner teeth washer and hex nut are attached. 2. Please process the mounting hole on the panel. The diameter should be 10.32mm+ 0.05. o (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) Extra tap (Available up to 1 tap) 0 Shaft with front and rear extension (Rear shaft with 6mm dia. and 20mm length) Multi-ganged (Available up to 10 gangs) 0 With stopper (Rotating angle is 320° and stopper strength is 0.6N • m [6kgf • cm]) 1-Turn ► Contact type ► Conductive plastic Standard Resistance Values Contact Resistance Variation Model FCP22R (Plastic Housing) General Specifications 0 Special electrical travel 0 Shaft dia. (<j> 6.35mm) & bushing with inch dimension 0 Special machining on the shaft Note: 1.1 pc. each inner teeth washer and hex nut are attached. 2. Please process the mounting hole on the panel. The diameter should be 10.32mm+°05. Contact Resistance Variation # Special Specifications Available (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) 0 Extra tap (Available up to 1 tap) 0 Special electrical travel 0 Shaft dia. (<j> 6.35mm) & bushing with inch dimension 0 Special machining on the shaft >|r SHANGHAI SIBO M & E CO.,LTD.

Open the catalog to page 1

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures

Archived catalogs

JOYSTICK 100JB
2 Pages
FCPS22AC
2 Pages
FCP22AC
2 Pages
JOYSTICK 30JL
2 Pages
JOYSTICK H30JH
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list