*mydirectindustry

FCP22AC

Product catalog summary

Overview: The document provides technical specifications for the FCP22AC Series Precision Single-Turn Potentiometer, manufactured by Shanghai Sibo M & E Co., Ltd. It includes details on standard dimensions, mechanical and electrical specifications, environmental characteristics, and special options available.

Standard Dimensions: The potentiometer comes with an inner teeth washer and hex nut. A mounting hole of 10.32mm diameter is required on the panel.

Mechanical Specifications: The potentiometer features a conductive plastic resistive element, bushing mount, and is low-cost. It has a housing diameter of 22mm, protection grade IP40, and a starting torque of less than 5mN·m. The mechanical travel is 360º with an aluminum housing. The rotational life expectancy is 10,000,000 revolutions under specified conditions.

Electrical Specifications: The operating temperature range is -55℃ to +105℃. It can withstand high temperatures of 105℃ for 1000 hours and low temperatures of -55℃ for 24 hours without significant resistance variation. The standard resistance values are 1k, 2k, 5k, and 10k ohms, with special values available. The power rating is 1.0W, and the insulation resistance is greater than 1000MΩ.

Environmental Characteristics: The potentiometer can endure vibrations from 10Hz to 2000Hz and shocks of 490m/s². It has moisture resistance at 40℃ and 95% RH for 120 hours. The resistance temperature coefficient is ±400p.p.m./°C.

Special Specifications: Options include extra taps, a stopper for limited rotation, special shaft types, and special electrical travel. The document notes that specifications may change without notice to improve product quality and design.

Legal Notice: All rights are reserved by SIBO company, and unauthorized use may result in legal action.

Catalog excerpts

FCP22AC 系列精密单圈电位器 FCP22AC Series Precision Single-Turn Potentiometer 导电塑料 / Conductive Plastic 轴套安装 / Bushingmount 经济型 / Low-cost Item 符合RoHS / RoHS Compliant 标准尺寸 / Standard Dimensions 注Note: 1. 附1个内齿垫圈和1个六角螺帽。/ 1 set of inner teeth washer & hex nut is attached. ＋0.05 ＋0.05 2. 请在面板上预留直径为10.32mm 0 的安装孔。/ Please process the mounting hole on the panel. The diameter should be 10.32mm 0 . 选型指导 / Selection Guide 例 / Example: FCP22AC-5K S → 特殊规格 / Special Specification FCP → 产品系列 / Series 22AC → 外径 / Dimensions 导电塑料电阻 / Conductive plastic resistive element type 00000 → 4或5位数 / 4 or 5 digits branch number 特殊机械规格 / Special mechanical specifications 500Ω~100kΩ 用于特殊需求 / To be used for specific requirements 一般机械性能 / General Mechanical Specifications 机械行程 Mechanical travel 防护等级 Protection grade (IP) 启动力矩 Starting torque 预期旋转寿命 Rotational life expectancy 质量 Mass 外壳 Housing material 上海思博机械电气有限公司 SHANGHAI SIBO M & E CO.,LTD.

Open the catalog to page 1

FCP22AC 系列精密单圈电位器 FCP22AC Series Precision Single-Turn Potentiometer 环境特性 / Environmental Specifications 工作温度 Operating temperature range 温度循环 Temperature cycle -55℃～+105℃ 在-55℃～+105℃循环 5次，总阻值变化低于±10%，无机械损坏。/ 5 cycles under -55℃～ +105℃, total resistance value variation: <± 10％, No mechanical damage. 在-55℃24小时，总阻值变化低于±5%，无机械损坏。/ 24 hours at -55℃, Total resistance value variation: <±5％, No mechanical damage. 高温 Exposure at high temperature 在105℃1000小时，总阻值变化低于±10%，无机械损坏。/ 1,000 hours at 105℃, Total resistance value variation: <±10％, No mechanical damage. 10Hz～2000Hz，147m/s²，12小时，总阻值变化低于±2%，无机械和电气损坏。/...

Open the catalog to page 2

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures

Archived catalogs

JOYSTICK 100JB
2 Pages
FCPS22AC
2 Pages
JOYSTICK 30JL
2 Pages
JOYSTICK H30JH
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list