*mydirectindustry

FCP22A

Product catalog summary

Overview: The document provides technical specifications for various models of conductive plastic potentiometers, including FCPS22AC, FCP22A, and FCP30A. These potentiometers are designed for servomount applications and are RoHS compliant.

General Specifications:

Standard Resistance Values: Available in 1k, 2k, 5k, and 10k ohms.
Special Practical Resistance Values: Options include 500, 20k, 50k, and 100k ohms.
Total Resistance Tolerance: Standard Class ±10%, Precision Class ±5%, Super Precision Class ±0.25%.
Independent Linearity Tolerance: Standard Class ±1.0%, Precision Class ±0.5%, Super Precision Class ±0.2%.
Resolution: Essentially infinite.
Output Smoothness: Within 0.1% against input voltage.

Model-Specific Details:

FCPS22AC: Power rating of 1.0W, electrical travel of 320°±5°, mechanical travel of 360° (endless), insulation resistance over 1,000MΩ at 500V.D.C., dielectric strength of 1 minute at 500V.A.C., starting torque within 5mN・m (50gf・cm), mass approximately 20g.
FCP22A: Similar specifications to FCPS22AC with slight variations in dimensions and mass.
FCP30A: Power rating of 1.5W, electrical travel of 340°±5°, mechanical travel of 360° (endless), insulation resistance over 1,000MΩ at 1,000V.D.C., dielectric strength of 1 minute at 1,000V.A.C., starting torque within 2mN・m (20gf・cm), mass approximately 25g.

Additional Features:

Extra tap available up to 1 tap.
Multi-ganged option available up to 5 gangs, with housing length extended by 8.5mm per gang.
Shaft with front and rear extension, special machining on the shaft, and stopper with specified rotating angle and strength.

Special Specifications: Custom specifications may alter general and environmental specifications. Consultation is advised for special requirements.

Catalog excerpts

MODEL FCPS22AC Conductive Plastic # Servo mount # Oilless Metal Bearings Incorporated # Low-cost Item # RoHS Compliant 1-Turn ► Contact type ► Conductive plastic General Specifications Standard Resistance Values Contact Resistance Variation (In case of the potentiometer with special specifications, the general specifications • Special Specifications Available and environmental specifications may change. Please consult us in advance.) Extra tap (Available up to 1 tap) 0 Shaft with front and rear extension (Rear shaft with 3mm dia. and 20mm length) With stopper (Rotating angle is 320° and stopper strength is 0.9N • m [9kgf • cm]) 0 Special electrical travel 0 Shaft dia. (<t> 6.35mm) 0 Special machining on the shaft 0 With ball bearings incorporated MODEL FCP22AConductive Plastic Servomount RoHS CompliantStandard Dimensions 68 SHANGHAI SIBO M & E CO.,LTD.

Open the catalog to page 1

U&iMV General Specifications Standard Resistance Values Contact Resistance Variation (In case of the potentiometer with special specifications, the general specifications • Special Specifications Available and environmental specifications may change. Please consult us in advance.) Extra tap (Available up to 1 tap) 0 Multi-ganged (Available up to 5 gangs, Housing length is extended by 8.5mm per 1 gang) Shaft with front and rear extension (Rear shaft with 3mm dia. and 10mm length) With stopper (Rotating angle is 320° and stopper strength is 0.3N • m [3kgf • cm]) 0 Special electrical travel 0 Shaft...

Open the catalog to page 2

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures

Archived catalogs

JOYSTICK 100JB
2 Pages
FCPS22AC
2 Pages
FCP22AC
2 Pages
JOYSTICK 30JL
2 Pages
JOYSTICK H30JH
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list