*mydirectindustry

DRAW WIRE SENSOR XL80

Product catalog summary

Overview: The document provides technical specifications and details for the XL80 Series Draw-wire Position Sensors, manufactured by Shanghai Sibo M&E Co., Ltd. These sensors are designed for long-range measurements and incorporate either multi-turn contact/contactless potentiometers.

Specifications:

Measurement Range: Up to 3000mm.
Output Signals: Options include 5K, 10K, 0~5V, 0~10V, and 4~20mA.
Housing Dimensions: 78mm x 78mm.
Protection Degree: IP54.
Operating Temperature Range: -30°C to +85°C.
Mechanical Life Expectancy: 1,000,000 cycles for wirewound potentiometer, 20,000,000 cycles for contactless potentiometer.

Electrical Specifications:

Contactless Potentiometer: Applied voltage of 5V±10% or 24V±10%, with output signals of 0~5V, 0~10V, or 4~20mA.
Wirewound Potentiometer: Applied voltage of 5V±10% or 15~30V, with output signals of 0~5V or 0~10V.
Resolution: 4096 (12 Bit).
Response Frequency: 300KHz.

Mechanical Specifications:

Tensile Force: 2N~4N.
Max Reciprocating Speed: 300mm/s.
Housing Material: Anodized aluminium alloy.
Wire Rope: 0.6mm flexible wire.

Environmental Specifications:

Vibration: 10~1500Hz, 10G.
Shock: 50G.

Special Features: The sensors can be customized with special specifications, including multi-segment output, special cables, and high protection degrees. For specific requirements, consultation with SIBO is recommended.

Catalog excerpts

XL80 Series Draw-wire Position Sensor Incorporate multi-turn contact/contactless potentiometer ♦ -KfrS / Long ranges V / Selection Guide 9\ / Example : XL80W-2000-10K XL -> ^p°q^iJ / Series XL ffigffam / Draw wire sensor 80 -> / Housing dimensions 80 / Housing diameter 78mm*78mm H Incorporate Multi-turn contactless potentiometer Potentiometer incorporated W Incorporate Multi-turn wirewound potentiometer Input voltage / Output signal Incorporate Multi-turn wirewound potentiometer Note1 Measure stroke: If choose sensor with multi-turn contactless hall potentiometer,we can provide any measure stroke between 1200~3000mm. Output signal within non-effective area can be held on high, low and both ends. H2 0%~90% Note2 Output signal: If choose sensor with multi-turn contactless hall potentiometer,any output range within 0%~100% can be provided,as 10%~90%,etc.

Open the catalog to page 1

XL80 系列拉线传感器 XL80 Series Draw-wire Position Sensor / General Mechanical Speci cations Measure stroke Protection degree Tensile force Mechanical Life expectancy Mass Housing material / Anodized aluminium alloy / 0.6mm exible wire Note3 Mechanical life expectancy: W:1,000,000 (Incorporate Multi-turn wirewound potentiometer) , H:20,000,000 (Incorporate Multi-turn contactless hall potentiometer) 4 Note4 The length of the cable: Cables of special length can be provided. Cables with the connector can be provided. / Environmental Speci cations Operating temperature range Storage temperature range /...

Open the catalog to page 2