DB 系列计数旋钮 DB Series Turn-Counting Dial ◆ 数字读数 / Digital-readout ◆ 符合RoHS / RoHS Compliant DB10-26B (三位读数 3 digits indication) 标准尺寸 / Standard Dimensions DB10-26B 16.5 ±1 面板开孔尺寸 Panel arrangements 1×M3 安装螺丝 Fixing screw 15.2 26.0 ±1 注1：标记※的尺寸已安装的电位器而定。/ Note1: The diameter of ※hole is depending on the diameter of potentiometer to be mounted. 注2：附有安装螺母、垫圈和内六角扳手。/ Note2: Fixing nut, washer and hexagonal wrench are attached. DB10-26BA (外壳尾部有一止转钉 With an anti-rotation pin on the rear side of the case) DB10-26BD (外壳尾部有一止转钉，无弹性接头 With an anti-rotation pin on the rear side of the case and without a flexible coupling) 面板开孔尺寸 Panel arrangements φ 3.175 1×M3 安装螺丝 Fixing screw φ2.5孔hole 若DB10-26BD不用开这个孔 In case of DB10-26BD no need to mark this hole 26.0±1 注3：标记※的尺寸已安装的电位器而定。/ Note3: The diameter of ※hole is depending on the diameter of potentiometer to be mounted. 选型指导 / Selection Guide 例 / Example：DB10-26B S → 特殊规格 / Special specification DB → 产品系列 / Series 特殊机械规格 / Special mechanical specifications 数字读数型计数旋钮 / Dial, digital-readout 壳体宽度约26mm / Housing width about 26mm 带锁定（标准型）/ With lock device (Standard) B → 带机械锁定 / With lock device 6 → 适配轴径 / Matching shaft diameter 00000 → 4或5位数 / 4 or 5 digits branch number

DB 系列计数旋钮 DB Series Turn-Counting Dial 一般性能 / General Specifications 标准型号 Model No. 适合轴径（mm） Matching shaft diameter 标准 Standard 可连接的多圈电位器（适合轴 长25mm）Combinable Helicalohm Pot. (Matching shaft length of 25mm) 外壳标准色 Standard Color of Case 弹性接头 Flexible coupling 锁定装置 Lock device 工作温度 Operating temperature range 质量(约g) Mass (Approx. g) 注5：DB10-26BD不附安装接头和螺帽，因为安装此旋钮和电位器时不需要这些安装件。/ Note5: DB10-26BD version does not attach mounting adaptor and nut, because such mounting hardware does not need when mounting this dial and the potentiometer. 结构和安装方式 / Construction and Mounting Method 外部刻度 Outer graduations...