*mydirectindustry

20HHP series

Product catalog summary

Overview: This document provides technical specifications for the Model 20HHP and 20HHPS multi-turn contact type hybrid potentiometers. It includes details on standard dimensions, model numbers, resistance values, and general specifications.

Specifications:

Model Numbers: 20HHP-5S, 20HHPS-5S, 20HHP-10S, 20HHPS-10S.
Resistance Values: 1k to 50k for 5-turn models; 2k to 100k for 10-turn models.
Total Resistance Tolerance: Standard Class ±10%, Precision Class ±5%.
Independent Linearity Tolerance: 5-turn: ±0.35% (Standard), ±0.2% (Precision); 10-turn: ±0.25% (Standard), ±0.1% (Precision).
Resolution: Essentially infinite.
Output Smoothness: Within 0.05% (5-turn), 0.015% (10-turn) against input voltage.
Contact Resistance Variation: Within 5% (5-turn), 3% (10-turn).
Power Rating: 1.0W (5-turn), 2.0W (10-turn).
Electrical Travel: 360°×n±5° (n: No. of turns).

General Specifications:

Mechanical Travel: 360°×n (n: No. of turns).
Insulation Resistance: Over 100MΩ at 1,000V.D.C.
Dielectric Strength: 1 minute at 1,000V.A.C.
Starting Torque: Within 5mN・m (Bushingmount), 3mN・m (Servomount).
Stopper Strength: Approx. 0.9N・m (Bushingmount), 0.6N・m (Servomount).
Resistance Temperature Coefficient: ±100p.p.m./℃.
Mass: Approx. 20g (5-turn), 25g (10-turn).

Special Specifications Available: Options include extra tap, multi-ganged, shaft extensions, special machining, slipping-clutch, limit-switch adaptor, and simple sealed housing.

Notes: Bushingmount type includes lug terminals, and servomount type comes with an inner teeth washer and hex nuts.

Catalog excerpts

Multi turn ► Contact type ► Hybrid MODEL 20HHP# Hybrid # Bushingmount # Servomount # RoHS Compliant Model 20HHP-10S (Bushingmount) Standard Model Numbers Bushingmount type Standard Dimensions ■ Bushingmount type With lug terminals Note: 1 pc. inner teeth washer and 2 pcs. hex nuts are attached. ■ Servomount type General Specifications Standard Resistance Values Mechanical Travel (In case of the potentiometer with special specifications, the general specifications and environmental specifications may change. Please consult us in advance.) • Special Specifications AvailableExtra tap (Available up to 1 tap) 0 Multi-ganged (Available up to 2 gangs)Shaft with front and rear extension (Rear shaft with 2mm dia. and 10mm length)Shaft dia. (<£ 6.35mm for 20HHP, (t> 3.175mm for 20HHPS) & bushincj with inch dimonsion Spocial machining on th© shaftWith slipping-clutch (20mN • m ~ 60mN • m) 0 With a limit-switch adaptor 0 Simple sealed housing (except servomount type) 42 "shanghai sibo m & e CO.,ltd.

Open the catalog to page 1

All SENTOP by Shanghai Sibo M&E Co., Ltd. catalogs and technical brochures

Archived catalogs

JOYSTICK 100JB
2 Pages
FCPS22AC
2 Pages
FCP22AC
2 Pages
JOYSTICK 30JL
2 Pages
JOYSTICK H30JH
2 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Contact Us
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials