- Catalogs
- SENSY S.A.
- INDI-PSD : HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS
INDI-PSD : HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS
INDI-PSD : HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS
SENSY's INDI-PSD hand-held displays are designed for applications such as force and torque measurement and mobile weighing. They are compatible with load cells, force transducers, or torque meters based on strain-gauge technology.
- 7-digit LCD display with high resolution.
- Lightweight at 250 g.
- Dual range capability.
- Long battery life of 450 hours in power save mode.
- TEDS enabled for automatic calibration.
- RS-232 output available in the INDI-PSD232 model.
- Tare, hold, peak, through, and shunt calibration functions accessible via front keys.
- Easy and automatic calibration options.
- Input range: ± 5 mV/V.
- Sensor excitation: 5 VDC (59 mA max.).
- Non-linearity error: <± 0.005% F.S.
- Service temperature range: -10 to +50 °C.
- Storage temperature range: -40 to +65 °C.
- Temperature coefficient of sensitivity: <± 0.005% F.S./10°C.
- Temperature coefficient of zero signal: <± 0.007% F.S./10°C.
- Power supply: 2 x AA alkaline batteries with a life of 35 hours (450 hours in low power mode).
- IP rating: IP65.
- CASE-PSD: Leather case with shoulder strap and clear viewing.
- BATT-PSD: Rechargeable batteries with charging unit (230 VAC).
Standard dimensions and sensor connections are provided, including a 5-pin 723 series Binder connector for sensor connections and an 8-pin 723 series Binder connector for RS232 port connections.
Catalog excerpts
Lwww.sensy.com HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERSThe INDI-PSD are hand-held indicators for load cells, force transducers or torque meters based on strain-gauge technology. Features o 7 digit LCD display o High resolution o Light (250 g) o Dual range o Large autonomy (450 h in power save mode) o TEDS enabled o RS-232 output (INDI-PSD232 only) - CASE-PSD: leather case with shoulder strap and clear viewing - BATT-PSD: rechargeable batteries with charging unit (230 VAC) SENSY's INDI-PSD are perfectly designed for the following applications: Force and torque measurement, Mobile weighing. ■ Tare, hold, peak, through and shunt calibration functions by front keys ■ Easy calibration by front keys ■ Automatic calibration by TEDS *F.S. : Full Scale. ** : Battery life : 35 h (450 h in low power mode) with transducer of 350 ohms. *** : Transducer impedance of 85...5000 ohms. Specifications subject to change without notice.
Open the catalog to page 1
TECHNICAL DRAWINGS: HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS Other views Sensor connections 5 pin 723 series Binder connector Pin1 + Excitation Pin 2 - Excitation & TEDS Common RS232 Port 8 pin 723 series Binder connector Pin1 Tx Pin 2 Rx
Open the catalog to page 2All SENSY S.A. catalogs and technical brochures
FORCE AND TORQUE MEASUREMENT6 Pages
0IL & GAS INSTRUMENTATION6 Pages
3500 : SHEAR BEAM LOAD CELLS3 Pages
5050M : SUBSEA LOAD SHACKLES2 Pages
5510 : SHEAR BEAM LOAD CELL5 Pages
4500 : SHEAR BEAM LOAD CELLS3 Pages
5000M : LOAD SHACKLES2 Pages
5300 : STANDARD LOAD PINS2 Pages
5000 : CUSTOM-MADE LOAD PINS4 Pages
Archived catalogs
Force and torque transducers41 Pages
- Measuring device
- Data logger
- Test stand
- Measuring machine
- SENSY tension/compression load cell
- SENSY steel load cell
- SENSY strain gauge load cell
- Terminal box
- Digital indicator
- SENSY stainless steel load cell
- SENSY weighing load cell
- Panel panel meter
- Signal amplifying integrated circuit
- SENSY beam type load cell
- Data-logger with screen
- Weighing terminal
- Electronic display panel
- SENSY compression load cell