ANALOGUE INPUT PANEL METERS WITH DUAL LINE DISPLAY Panel meters with two display lines for Wheatstone bridge sensors or electrical analogue measurements o Dual line display 6 digits (18 mm) and 9 digits (8.9 mm) o Tricolour display o Universal power supply (AC/DC) o Up to 160 measurements per second o Built-in USB programming port unit configuration Available option(s) Applications - Analogue output 4 (0)...20 mA or 0...10 V -2 or 4 set-points with relay outputs - RS-232, RS-485 or fieldbus capabilities - NEXMA 4X / P65 (transparent cover - Option "COVER PAX") - Desktop or industrial steel housing - DIN rail adaptor SENSY's INDI-PAX2S and DISP-PAX2A are perfectly designed for the following applications: ■ Weighing batches with individual and cumulative weights, ■ Weighing with net and gross weight display. Function(s) - Linearisation (15 points max.), intelligent filter, totaliser, security code - Maximum and minimum memory - Simultaneous display in 2 different units (e.g.: kg and N) - Display of the input signal and the corresponding measurement

TECHNICAL DRAWINGS: ANALOGUE INPUT PANEL METERS WITH DUAL LINE DISPLAY Note: recommended min. clearance (behind the panel) for mounting is 140 mm deep and 53.4 mm high. Panel cut-out 92 mm (-0+0.8) 45 mm (-0+0.5) Other view

Communication cards (max. 1 choice) CARD-CDC1C RS-485 field bus communication interface Available with crew terminals or DB9 connector CARD-CDC2C FEMALE PIN 2 TXD PIN 3 RXD PIN 5 COMMON * As the CARD-CDC50 is too long for the housing of the CRANE-BOY, the CARD-CDC50-CRANE is supplied with a spacer to be inserted between the front of the electronics and the housing. Analogue output card: CARD-CDL10 Relay card: CARD-CDS20 (4 set-points) Models: CABIN-2xB1SUMD; CABIN-4xB1SUMD Models: INDI-BOY DISP-BOYP; CRANE-BOY CRANE-BOYP; DISP-BOYDP CRANE-BOYDP; CRANE-SUMD DISP-SUMD; CRANE-BOY-Exd; CABIN-2xB1SUMD;...