CRANE OVERLOAD PROTECTION ELECTRONICS Crane overload protection electronics with 3 set-points and display to be installed on a front panel. Features o Easy and intuitive calibration o Display of hoisted load and input signal o Internal monitoring system of load cell integrity and load limitation electronics (fail safe) Available option(s) Applications - Analogue output 4 (0).. .20 mA or 0.. .10 V - RS-232, RS-485 or fieldbus capabilities - NEMA 4X / IP65 (transparent protection cover + Option "COVER PAX") - rail DIN adaptor - power supply: 48 VAC (only for 85...230 VAC version) - also available with industrial metallic housing (see CRANE-BOY and CRANE-BOYP products) SENSY's INDI-BOY and DISP-BOYP are perfectly designed for the following applications: - OEM - Overload protection and slack rope detection of: overhead cranes, container cranes, gantry cranes. Function(s) - Internal survey system of the load cell and the electronics (fail safe) - Test button to check the correct working of the detection system - Secret code prohibiting programming by unauthorised users - Intelligent filter with quick reaction to overload while not reacting to a transitory non-significant overload - Maximum and minimum memories *F.S. : Full Scale. ** : 5 VDC @ 65 mA max (jumper selectable). *** : IP rating for front panel only. Specifications subject to change without notice.

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS Note: recommended min. clearance (behind the panel) for mounting is 140 mm deep and 53.4 mm high. Panel cut-out 92 mm (-0+0.8) 45 mm (-0+0.5) Other view CARD CDS20 Relay 1 Common Common Relay A ^

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS DISP-BOYP > STANDARD DIMENSIONS Note: recommended min. clearance (behind the panel) for mounting is 140 mm deep and 53.4 mm high. Panel cut-out 92 mm (-0+0.8) 45 mm (-0+0.5) Other view

Communication cards (max. 1 choice) CARD-CDC1C RS-485 field bus communication interface Available with crew terminals or DB9 connector CARD-CDC2C FEMALE PIN 2 TXD PIN 3 RXD PIN 5 COMMON * As the CARD-CDC50 is too long for the housing of the CRANE-BOY, the CARD-CDC50-CRANE is supplied with a spacer to be inserted between the front of the electronics and the housing. Analogue output card: CARD-CDL10 Relay card: CARD-CDS20 (4 set-points) Models: CABIN-2xB1SUMD; CABIN-4xB1SUMD Models: INDI-BOY DISP-BOYP; CRANE-BOY CRANE-BOYP; DISP-BOYDP CRANE-BOYDP; CRANE-SUMD DISP-SUMD; CRANE-BOY-Exd; CABIN-2xB1SUMD;...