Catalogs >
SENSY S.A. >
DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES

DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES
4Pages

Catalog excerpts

DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES - 1

Lwww.sensy.com CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES Electronics ensuring the individual limitation of loads lifted by 2 hoisting systems and limitation of the function of these loads (sum, difference, multiplication, ratio) * o Type: - DISP-BOYDP: to be installed on the front panel - CRANE-BOYDP: with industrial metallic housing o Easy and intuitive calibration o Display of hoisted loads and input signals o Internal monitoring system of the integrity of load cells and load limitation electronics (fail safe) Available option(s) Application^ - Analogue output 4 (0)...20 mA or 0...10 V - RS-232, RS-485 or fieldbus capabilities - NEMA 4X/IP65 (transparent protection cover + Option "COVER PAX" - rail DIN adaptor - power supply: 48 VAC (only for 85...230 VAC version) - stainless steel housing SENSY's DISP-BOYDP and CRANE-BOYDP are perfectly designed for the following applications: - OEM - overload protection and slack rope detection of: overhead cranes, container cranes, gantry cranes. Function(s) ■ Internal survey system of the load cell and electronics (fail safe) ■ "TEST" button to check the correct working of the detection system ■ Secret code prohibiting programming by unauthorised users ■ Intelligent filter with quick reaction to overload while not reacting to transitory non-significant overload ■ Maximum and minimum memories, smart filter ■ A math function (+, -, * or /) can be performed on both signals *F.S. : Full Scale. ** : IP rating for front panel only. Specifications subject to change without notice.

Open the catalog to page 1

DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES - 2

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES DISP-BOYDP > STANDARD DIMENSIONS Note: recommended min. clearance (behind the panel) for mounting is 140 mm deep and 53.4 mm high. Panel cut-out 92 mm (-0+0.8) 45 mm (-0+0.5) Other view

Open the catalog to page 2

DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES - 3

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES CRANE-BOYDP > STANDARD DIMENSIONS Other view

Open the catalog to page 3

DISP-BOYDP CRANE-BOYDP : CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 HOISTING DEVICES - 4

Communication cards (max. 1 choice) CARD-CDC1C RS-485 field bus communication interface Available with crew terminals or DB9 connector CARD-CDC2C FEMALE PIN 2 TXD PIN 3 RXD PIN 5 COMMON * As the CARD-CDC50 is too long for the housing of the CRANE-BOY, the CARD-CDC50-CRANE is supplied with a spacer to be inserted between the front of the electronics and the housing. Analogue output card: CARD-CDL10 Relay card: CARD-CDS20 (4 set-points) Models: CABIN-2xB1SUMD; CABIN-4xB1SUMD Models: INDI-BOY DISP-BOYP; CRANE-BOY CRANE-BOYP; DISP-BOYDP CRANE-BOYDP; CRANE-SUMD DISP-SUMD;...

Open the catalog to page 4