DISP-60 : DISPLAY FOR ROTARY TORQUE SENSOR

Product catalog summary

Overview: The DISP-60 is a display unit designed for use with SENSY's non-contact rotary torque sensors, specifically the 60000 series. It is suitable for applications such as torque measurement on test benches, production lines, or rotating machines.

Key Features:

Compatible with one torque sensor input (0...10 V) and one angle encoder or speed sensor input.
Includes 2 digital inputs and 2 relay outputs.
Equipped with a USB interface (2.0 HID) and an SD card slot for data storage.
Acquisition interval ranges from 10 ms to 1 hour.

Functionality: The DISP-60 provides power to the connected sensor and displays torque, angle, or speed measurements. Data can be stored on an SD card or transmitted to a computer in real-time using the included Windows® compatible software.

Specifications:

Input range: 0...10 V
Sensor excitation: 12 VDC
Display resolution: 122 x 32 pixels
Accuracy: Less than ±0.05% Full Scale
A/D converter frequency: 100 Hz
Internal resolution: 2.5 mV / 12 bits
Operating temperature: +5 to +50 °C
Power supply: 15...30 VDC, 200 mA consumption
Relay type: "Form A" (SPST), 1 A @ 125 VAC or 2 A @ 30 VDC
Dimensions: H 45 x W 92 x L 108 mm (front H 49 x W 96 mm)
Weight: 0.33 kg
IP rating: IP40

Additional Information: Specifications are subject to change without notice. The document includes technical drawings and standard dimensions for installation.

Catalog excerpts

DISP-60 : DISPLAY FOR ROTARY TORQUE SENSOR-1

The DISP-60 is a display specially designed to be connected with a non-contact rotary torque sensor of the SENSY 60000 series. o 1 torque sensor input 0...10 V o 1 angle encoder input (A/B) or speed sensor input (A) o 2 x digital input o 2 x relay output o USB interface (2.0 HID - Windows ® compatible software included) o SD card slot (SD / SD HC) o Acquisition interval: 10 ms...1 h SENSY's DISP-60 is perfectly designed for the following applications: - Torque measurement on test benches, production lines or rotating machines. The DISP-60 is a multifunctional read-out unit dedicated for the non-contact rotary torque sensors of the SENSY 60000 series. One unit can be connected to one torque sensor. The unit will then supply the power to the sensor. The analogue output (0...5 V or 0...10 V) of the sensor and/or its optional angle encoder should be connected to the unit. Torque, angle or speed can be displayed. The measurement data can be stored on an inserted SD flash memory card or directly sent to a computer via a USB interface in real time (Windows® software included).

Open the catalog to page 1