Lwww.sensy.com CRANE OVERLOAD PROTECTION ELECTRONICS FOR THE SUM OF SEVERAL CHANNELS CRANE-SUMD and DISP-SUMD are designed to limit the sum of the load of several hoisting devices already equipped with their ® own load limitation device. CRANE-SUMD DISP-SUMD Features o Type: - CRANE-SUMD: with industrial metallic housing - DISP-SUMD: to be installed on the front panel o Connected to the analogue output (4...20 mA) of the load limitation electronics BRIDGE-BOY, CRANE-BOY, INDI-BOY, DISP-BOYP, etc. (CARD-CDL10 option) o Easy and intuitive calibration o Display of hoisted load and input signals Available option(s) Applications - analogue output 4(0)...20 mA / 0...10 V - RS-232, RS-485 or fieldbus output - stainless steel housing - NEMA 4X/IP65 (transparent protection cover - Option "COVER PAX") - rail DIN adaptor SENSY's CRANE-SUMD and DISP-SUMD are perfectly designed for the following applications: - CRANE-SUMD and DISP-SUMD are designed to overload protection of the sum of loads, of up to 8 independent hoists (e.g.: 2 trolleys each limited to 10 t installed on an EOT crane limited to 15 t). Function(s) - Internal survey system of input signal and electronics (fail safe) - "TEST" buttons to check the correct working of the detection system - Secret code prohibiting programming by unauthorised users - Intelligent filter with quick reaction to overload while not reacting to transitory non-significant overload - Maximum and minimum memories

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS FOR THE SUM OF SEVERAL CHANNELS CRANE-SUMD > STANDARD DIMENSIONS Dimensions in mm Other view *: INDI-BOY, DISP-BOY, CRANE-BOY, ...

TECHNICAL DRAWINGS: CRANE OVERLOAD PROTECTION ELECTRONICS FOR THE SUM OF SEVERAL CHANNELS DISP-SUMD > STANDARD DIMENSIONS Note:recommended min. clearance (behind the panel) for mounting is 140 mm deep and 53.4 mm high. Panel cut-out 92 mm (-0+0.8) 45 mm (-0+0.5) Other view DISP-SUMD *: INDI-BOY, DISP-BOY, CRANE-BOY, ...

Communication cards (max. 1 choice) CARD-CDC1C RS-485 field bus communication interface Available with crew terminals or DB9 connector CARD-CDC2C FEMALE PIN 2 TXD PIN 3 RXD PIN 5 COMMON * As the CARD-CDC50 is too long for the housing of the CRANE-BOY, the CARD-CDC50-CRANE is supplied with a spacer to be inserted between the front of the electronics and the housing. Analogue output card: CARD-CDL10 Relay card: CARD-CDS20 (4 set-points) Models: CABIN-2xB1SUMD; CABIN-4xB1SUMD Models: INDI-BOY DISP-BOYP; CRANE-BOY CRANE-BOYP; DISP-BOYDP CRANE-BOYDP; CRANE-SUMD DISP-SUMD; CRANE-BOY-Exd; CABIN-2xB1SUMD;...